Cr Guide Frame - Epson Stylus CX4100 Service Manual

EPSON Stylus CX4100/CX4200/CX4700/CX4800/DX4200/DX4800/DX4850

4.4.16 CR Guide Frame

External view
Acetate Tapes
Tab
FFC Frame Holder
C.B.S. 3x6 F/Zn (7±1kgfcm)
Guide Pins
2
Figure 4-30. Removing CR Guide Frame
DISASSEMBLY/ASSEMBLY
FFC Guide CR Guide Frame
Guide Pins
Tab
Downside of CR Guide
Frame
1
Printer Section
Part/Unit that should be removed before removing CR Guide Frame
Document Cover / Paper Support Assy. / Scanner Unit / Panel Unit /
Housing, Upper / Printer Mechanism / Main Board Unit
Removal procedure
1. Peel off the acetate tape (x3) that secure the Head FFCs (x3).
2. Release the guide pins (x2, ) that secure the FFC Guide, and remove the
FFC Guide from the CR Guide Frame.
3. Release the tab (x1, ) on the bottom of the CR Guide Frame that secures the
FFC Frame Holder, and remove the FFC Frame Holder together with the
Head FFC.
4. Release the Head FFC from the tabs (x2,
5. Release the Head FFCs (x3) secured with the double-sided tape (x1) from the
CR Guide Frame.
6. Remove the screws (x2, ) that secure the CR Guide Frame, and remove the
CR Guide Frame from the Printer Mechanism.
Match the guide pins (x2,
positioning holes (x2) of the CR Guide Frame.
Tighten the screws in the order as shown in the figure.
Attach the Head FFCs (x3) with double-sided tape to the position
on the CR Guide Frame indicated with printed lines.
Figure 4-31. Attaching Head FFCs
Revision A
) of the FFC Frame Holder.
) of the Front Frame with the
Printed Lines
(Installation Position)
Double-sided Tape
149