Lincoln Electric SQUARE WAVE TIG 175 PRO Operator's Manual page 21

14
Observe all Safety Guidelines detailed throughout this manual
PROBLEMS
(SYMPTOMS)
Machine regularly over heats - ther-
mostat opens, Yellow light on front
panel glows. The fan runs but
machine has no output.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local
Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
TROUBLESHOOTING
POSSIBLE AREAS OF
MISADJUSTMENTS(S)
OUTPUT PROBLEMS
1. Welding application may
exceed recommended duty
cycle. Reduce the duty cycle.
2. Dirt and dust may have
clogged the cooling channels
inside the machine. Blow out
unit with clean, dry
low pressure air.
3. Air intake and exhaust louvers
may be blocked due to
inadequate clearance around
machine.
CAUTION
SQUARE WAVE TIG 175 PRO
RECOMMENDED
COURSE OF ACTION
Contact your Local Lincoln Authorized
Field Service Facility for technical
troubleshooting assistance.
14