Panasonic KX-TG1032C Operating Instructions Manual page 10

Preparation
Charger:
Note:
L It is normal for the handset to feel
warm during charging.
L If you want to use the handset
immediately, charge the batteries for
at least 15 minutes.
L To ensure that the batteries charge
properly, clean the charge contacts of
the handset, base unit, and charger
with a soft, dry cloth once a month.
Clean more often if the unit is subject
to the exposure of grease, dust, or
high humidity.
L When the batteries are empty, the
entire display may go blank and
"Charging" may not be displayed for
about 10 minutes even if you place
the handset on the base unit or
charger.
Battery level
Battery icon Battery level
Fully charged
5
Medium
6
Low
7
Flashing: needs to
be recharged.
10
Note:
L When the batteries need to be
charged, the handset beeps
intermittently during use.
Panasonic battery performance
Operation
While in use
(talking)
Charge
While not in use
contacts
(standby)
Note:
L Battery operating time may be
shortened over time depending on
usage conditions and surrounding
temperature.
L Battery power is consumed whenever
the handset is off the base unit or
charger, even when the handset is not
in use.
L After the handset is fully charged,
displaying "Charge completed", it
may be left on the base unit or
charger without any ill effect on the
batteries.
L The battery level may not be
displayed correctly or the entire
display may go blank after you
replace the batteries. In this case,
place the handset on the base unit or
charger and let it charge for 7 hours.
Operating time
Up to 17 hours
Up to 11 days