Detaching And Refitting The Original Feed Roller - Kyocera FS-1016MFP Service Manual
Hide thumbs
Also See for FS-1016MFP:
- Operation manual (92 pages) ,
- Specifications (2 pages) ,
- Features (4 pages)
Table of Contents
Advertisement
(3) Detaching and refitting the original feed roller
<Procedure>
1. Open the DP front cover.
2. Open the shaft holder.
3. Remove the original feed roller.
4. Check or replace the original feed roller and
refit all the removed parts.
Original feed roller
Figure 1-5-53
2G4
Shaft holder
DP front
cover
1-5-39
- Quick Links:
- Service Mode
- Self-Diagnosis
- Service Error Message
Hide quick links:
Advertisement
Table of Contents
