Troubleshooting - Lincoln Electric RANGER 305LPG IM10043-A Operator's Manual

Lincoln electric welder user manual
Table of Contents

Advertisement

E-2
PRObLEMS
(SYMPTOMS)
Major Physical or Electrical Damage
is Evident.
Engine will not "crank".
Engine will "crank" but not start.
Engine shuts down shortly after
starting.
Battery does not stay charged.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.

TROUbLESHOOTING

Observe all Safety Guidelines detailed throughout this manual
POSSIbLE
1. Contact your local Lincoln
Authorized
Facility.
1. Battery is low. Charge Battery.
2. Loose battery cable connections.
Inspect, clean and tighten.
3. Faulty engine starter motor.
4. "Battery Circuit" circuit breaker is
tripped.
1. LPG Fuel Cylinder Empty.
2. Faulty fuel solenoid or faulty PC
board or ignition system.
1. Low oil level. Change oil and oil filter
And fill to proper level. Start engine
And look for leaks.
2. Faulty oil pressure switch or other
engine component.
3. Low fuel level.
1. Faulty battery, replace.
2. Loose connections at battery or
alternator. Clean and tighten connec-
tions.
3. Faulty engine alternator or charg-
er module.
RANGER® 305LPG
CAUSE
Field
Service
If all recommended possible areas
of misadjustment have been
checked and the problem persists,
Contact your local Lincoln
Authorized Field Service Facility.
CAUTION
RECOMMENDED
COURSE OF ACTION
E-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ranger 305lpg

Table of Contents