Philips Senseo HD7872 User Manual
Hide thumbs
Also See for Senseo HD7872:
- User manual (110 pages) ,
- Manual (12 pages) ,
- User manual (62 pages)
Related Manuals for Philips Senseo HD7872
Summary of Contents for Philips Senseo HD7872
- Page 1 HD7872, HD7870 User manual Brugervejledning Benutzerhandbuch Mode d’emploi Gebruiksaanwijzing Brukerhåndbok For more support go to: www.philips.com/senseo-twist/support...
-
Page 5: Table Of Contents
Introduction 1-cup pod holder q Coffee spout cover Congratulations on your purchase and welcome Coffee spout to Philips! To fully benefit from the support 10 Spout release buttons that Philips offers, register your product at 11 Removable drip tray www.philips.com/welcome. -
Page 6: Important
If the mains cord is damaged, you must have it you must have it you must have it before first use replaced by Philips, a service centre authorised replaced by Philips, a service centre authorised replaced by Philips, a service centre authorised by Philips or similarly qualified persons in... - Page 7 Caution: Tilt the water reservoir and place the bottom Never flush the machine or let it brew coffee back onto the machine (1). Then press the top when the spout is not in place. of the water reservoir towards the machine (2). Tilt the top of the water reservoir backwards (1) and lift the water reservoir off the machine (2).
- Page 8 Put the plug in an earthed wall socket. • When all the water in the water reservoir has been used up, the flushing cycle is Press the on/off button 3. The button lights up finished and the machine switches off. to indicate that you have to flush the machine.
-
Page 9: Brewing Senseo ® Coffee
Pull the lid lever upwards to open the lid. 5 Brewing SENSEO ® The lid opens automatically. coffee While the SENSEO coffee machine is heating ® up, you can select the coffee strength you prefer and the number of cups you want to brew. The machine then brews the cup or cups immediately after it has heated up. - Page 10 Press the selection button to select the Note: Make sure the coffee in the pod or pods is desired coffee strength. Select the cup symbol evenly distributed. with three bars for a regular cup of coffee (125ml) (1). Select the cup symbol with one Caution: bar for a strong cup of coffee (60ml) (2).
- Page 11 When the coffee is ready, remove the used To enter the programming mode, first select coffee pod or pods. Simply lift the pod holder the personal coffee memory symbol (star out of the machine and empty it. symbol) with the selection button (1). Keep the selection button pressed for 2 seconds until the star symbol starts flashing (2) and Caution:...
- Page 12 5.2 Flushing the machine after Press the on/off button 3. The on/off button a day of non-use flashes slowly while the water heats up. If you have not used the coffee machine for one day, flush it to make sure that the boiler is filled with fresh water.
-
Page 13: Cleaning
To disassemble the coffee spout, grab the 6 Cleaning two ridges of the inner part of the spout and squeeze them lightly (1). Move the inner part Regular cleaning of your SENSEO is important downwards to remove it from the outer part ®... -
Page 14: Descaling
® when the CALC light goes on. Use SENSEO For more information about this descaler, ® visit our website www.philips.com. Descaler (HD7012, HD7011, HD7006) only. Warning: Never use a descaling agent based on mineral acids such as sulphuric acid, hydrochloric acid, sulphamic acid and acetic acid (e.g. - Page 15 Mix 50 grams of citric acid with 1 litre of Place the 1-cup pod holder q with a used water in a measuring jug. Stir until the powder coffee pod in it in the coffee machine. Close has dissolved. Fill the water reservoir with the the lid and make sure it is properly locked.
- Page 16 When the on/off button lights up continuously, Notes: press the 1-cup button q and the 2-cup Do not refill the water reservoir with used button qq at the same time for 3 seconds hot water or the used descaling mixture. until you hear a beep.
-
Page 17: Frost-Free Storage
If you need service or information or if you 8 Frost-free storage rost-free storage rost-free storage have a problem, please visit the Philips website at www.philips.com/support or contact the Philips After you have flushed the machine for the first After you have flushed the machine for the... -
Page 18: Troubleshooting
This chapter summarises the most common problems you could encounter with the machine. If you are unable to solve the problem with the information below, visit www.philips.com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country. - Page 19 Problem Solution The CALC light does The CALC light does not go out if the descaling procedure has not been not go out after performed correctly. To perform the descaling procedure correctly: descaling. 1. Make sure that you do not interrupt the descaling cycle or switch off or unplug the machine during the descaling cycle.
- Page 20 Problem Solution I cannot open the lid. A vacuum may have temporarily formed under the lid. Switch off the machine. Pull up the lever and wait 24 hours before you open the lid.You may need to use quite some force. Make sure that you do not move the SENSEO machine.
- Page 21 Problem Solution The coffee is not hot If you have used the machine for quite some time and the temperature of enough. the coffee decreases, we advise you to descale the machine. See chapter ‘Descaling’. Descale your SENSEO coffee machine regularly. ®...