Attach A Lens - Nikon D300 User Manual

Attach a Lens
Care should be taken to prevent dust from entering the camera
when the lens is removed.
1
Remove the rear lens cap and the camera body cap.
After confirming that the camera is off, remove the rear lens
cap from the lens and remove the camera body cap.
2
Attach the lens.
Keeping the mounting
mark on the lens
aligned with the
mounting mark on the
camera body, position
the lens in the camera's
bayonet mou nt. Bei ng
careful not to press the
lens-release button,
rotate the lens counter-clockwise until it clicks into place.
34
If the lens is equipped with an
A-M
or
M/A-M switch, select A (autofocus) or M/
A (autofocus with manual priority).
A M
...... r--
0Jr00)
MIA M
...... r--
curDO)