Using The Built-In Flash - Nikon D300 User Manual

Using the Built-in Flash
Follow these steps when using the built-in flash.
1
Choose a metering method (pg.
Metering selector
102).
Select matrix or center-weighted
metering to activate i-TTL balanced fill-
~ ~
flash for digital SLR. Standard i-TIL flash
~~~~~W
for digital SLR is activated automatically
when spot metering is selected.
5 F5.6
p
so
200[5'"
2
Press the flash pop-up button.
The built-in flash will pop up and begin
charging. When the flash is fully
charged, the flash-ready indicator
(~)
will light.
3
Choose a flash mode.
Press the
~
button and rotate
the main command dial until
the desired flash mode icon is
displayed in the control panel
(pg.
176).
~
button
Main command
dial
""
u.u
~
Control panel
173