Torch Continuity And Solenoid Test - Lincoln Electric PRO-CUT 25 SVM149-A Service Manual

F-25

TORCH CONTINUITY AND SOLENOID TEST

Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid
electrical shock, please observe all safety notes and precautions detailed throughout this
manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical
troubleshooting assistance before you proceed. Call 1-888-935-3877.
DESCRIPTION
This procedure will help the technician determine if the torch cable, consumables and elec-
trode solenoid are functioning properly.
MATERIALS NEEDED
Volt/Ohmmeter
12 VDC @ 1 Amp Power Supply
7mm Nut Driver
4mm Allen Wrench
Crescent Wrench
TROUBLESHOOTING & REPAIR
WARNING
PRO-CUT 25
F-25