Skoda Fabia Operating Instructions Manual page 191

›
Remove the protective cap » Fig. 194
D
›
Turn the holder with the bulb in the direction of arrow
›
Remove the holder with the bulb in the direction of arrow
›
Remove the bulb from the holder in the direction of the arrow
›
Insert a new bulb into the connector so that the lug
snaps into the groove on the bulb.
›
Insert the connector with the new bulb into the headlight in the opposite di-
rection to the arrow .
2
›
Turn the connector with the new bulb in the opposite direction to the arrow
until it stops.
1
›
Fit protective cap » Fig. 194
D
›
Replace the appropriate cover in the front wheel arch
Replacing the high beam bulb (halogen projector headlights)
Fig. 202 Changing the bulb for the main beam

Read and observe and
Remove the holder of the wash water container nozzle before replacing the
lamp in the right headlight » page
›
Remove the protective cap » Fig. 194
E
›
Turn the holder with the bulb in the direction of arrow
›
Remove the holder with the bulb in the direction of arrow
›
Remove the bulb from the holder in the direction of the arrow
›
Insert a new bulb into the connector so that the lug
snaps into the groove on the bulb.
›
Insert the connector with the new bulb into the headlight in the opposite di-
rection to the arrow .
2
›
Turn the connector with the new bulb in the opposite direction to the arrow
until it stops.
1
188
Do-it-yourself
on page 185.
» Fig.
1
.
2
3
on the connector
A
on page 185.
» page 185.
on page 184 first.
185.
on page 185.
» Fig.
1
.
2
3
on the connector
A
›
Fit protective cap
201.
After changing the lamp in the right headlamp, replace the holder of the wash
water container nozzle
.
Replacing the turn signal switch bulb (halogen projector
headlights)
Fig. 203 Changing the bulb for the turn signal light

Read and observe
To replace lamp, first remove the bracket of the wash water container nozzle
in the right headlight
›
Remove the protective cap
›
Remove the bulb holder with the bulb by jiggling it out in the direction of the
arrow » Fig.
1
›
Grasp the lamp socket at the places marked by arrows.
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Push a new bulb into the bulb holder up to the stop.
›
Replace the bulb holder in the headlamp with the bulb.
›
Fit protective cap
202.
After changing the lamp in the right headlamp, replace the holder of the wash
water container nozzle
.
» Fig. 194 on page 185.
E
» page 185.
and on page 184 first.
» page 185.
» Fig. 194 on page 185.
E
203.
» Fig. 194 on page 185.
E
» page 185.
.
2