Backup Battery - Sony PMW-EX3 Operating Instructions Manual

LENS
Au t o FB ADJ
F i l e
B
F l a r e B
Shad i ng
B
00:00
8
Select "Store" and specify the file in
which you wish to store the data.
LENS
Au t o FB ADJ
F i l e
B
F l a r e
B
Shad i ng
B
00:00
9
When the confirmation message is
displayed, select "Execute."
If the lens is a serial lens, the corresponding lens
file is automatically retrieved when you next
mount the lens, as long as "Auto Recall" is set to
"On."
If the lens is a non-serial lens or if "Auto Recall"
is set to "Off," retrieve the corresponding file
with a menu operation (Recall) when you next
mount the lens.
To change the file name
The initial file names (User_File1 to User_File4)
can be changed with "File ID" of the menu (up to
16 characters).
To clear the compensation data
The compensation data of the current lens file can
be cleared to the factory-set values by selecting
"No Offset" from the menu.
For details on menu operations, see "Basic Menu
Operations" on page 111.
144

Backup Battery

YH12x4.8IRS
Lens I D
Recal l
B
S t ore B
F i l e I D : U1: User_Fi l e 1
No O f f set
Au t o Reca l l : On
Lens I D VCL-614B2X
Recal l XS8X4AS- XB8
B
S t ore User_Fi l e 1
B
F i l e I D : User_Fi l e 2
No O f f set User_Fi l e 3
Au t o Reca l l : User_Fi l e 4
Backup Battery
This camcorder uses a backup battery to retain
various setting data.
A lithium battery (CR2032) for backup is
mounted in the camcorder at the factory.
The backup battery retains the date, time, and
timecode in Free Run mode even when no
operating power is being supplied.
Service life of the backup battery
When the backup battery's voltage falls, the
backup battery low-voltage warning appears in
the viewfinder.
If this warning appears, replace the battery as
soon as possible.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of in
fire.
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
Replacing the backup battery
Notes
• Be sure to set the power switch to OFF when
replacing the backup battery.
• Be careful not to drop the removed screw into
the camcorder.
1
Open the cover of the backup battery
holder on the bottom by loosening the
screw, and remove the battery.