PSB 760IMGNT Owner's Manual

Owner's Guide
Thank you for your purchase. Our speakers are designed to make high-performance
sound easy to bring into your life. They have the wide frequency and dynamic range,
natural tonal balance, and precise spatial imaging needed to make both music and
movies powerfully lifelike and enjoyable. All of our models match closely in tonal balance
to allow easy mixing in home theater systems.
The quick-start instructions below will get you going. But we hope you will read through
this booklet to help assure your maximum enjoyment.
I. QUICK-START GUIDE
A. Be sure power to your amplifier/receiver and other electronics is off
before making connections.
B.
Install bumpers or feet with adjustable levelers or spikes.
1. Bumpers and Support Bars (Bookshelf and Center Channel
Speakers)
Attach the adhesive-backed bumpers near the corners of bookshelf
and center channel speakers, to protect the finish of the speaker
and the finish of the furniture beneath. For centre channel speakers
supplied with support bars, position the bar to aim the speaker
toward the listening position.
2. Molded Feet and Stabilizers, Adjustable Rubber Levelers and
AdJustable Spikes (Tower Speakers)
If not already attached, screw the supplied moulded feet into the
threaded inserts located in the corners of the speaker bottom. In
some models, speaker spikes for carpet use or threaded rubber
isolation levelers for hard floor use can be inserted into the feet. In
other models, spikes or levelers go directly into the threaded
inserts in the pedestal base on the bottom of the speaker rather
than into feet.
SPEAKERS