FujiFilm Finepix J10 Basic Manual page 160

92
I
Installation on a Windows PC
Pre-installation checklist
• Hard ware (software) requirements and recommended system
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Requirement Recommendation
"
Windows 98 SE Windows XP Windows Vista
Windows Millennium Edition (Windows Me)
Operating
Windows 2000 Professional*2
System*1 Windows XP Home Edition*2
Windows XP Professional*2
Windows Vista*2
CPU
200 MHz Pentium minimum 2 GHz Pentium 4 or
3 GHz Pentium 4 or
(Windows XPNista users: 800MHz Pentium 4 or better recommended) better
better
RAM
128 MB minimum (512 MB minimum for Windows Vista) 512 MB or better 1 GB or better
Hard disk
Amount required for installation: 450 MB minimum
2 GB or better 15 GB or better
space
Amount required for operation: 600 MB minimum
Display 800 x 600 pixels or better, 16-bit color or better 1024 x 768 pixels or better, Highest (32 bit)
*1 Models with one of the above operating systems pre-installed.
*2 When you install the software, login using a system administrator account (e.g. "Administrator").
CD
CAUTION
• Note that the software to be installed is different depending on the
as.
(Windows 98SE/Me: FinePixViewer, Windows 2000/XP/
Vista: FinePixViewer S)
• Additional USB interface board is not guaranteed.
• Windows 95, Windows NT and Windows 98 cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.