FujiFilm Finepix J10 Basic Manual page 149

How to use the [SET-UP] menu (-p.78)
~
CHECK
The last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers, while
the first 3 digits show the directory number.
t1
MEMO
• Setting this function to [CaNT] makes file management
easier as it makes sure that file names are not
duplicated when images are downloaded to a PC.
• When the camera settings are [til RESET] (-p.80),
the frame number setting ([CaNT] or [RENEW]) is
changed to [CaNT] and the frame number itself does
not return to 0001.
• In [CaNT] setting, images are stored beginning from
the highest file number on the current Memory Card
when the Memory Card already contains image files
with file numbers higher than the highest file number on
the last Memory Card.
• The displayed frame number may differ for images
photographed on other cameras.
I
[FRAME NO.]
Use this function to specify whether frame numbers are
assi,gned consecutively from previous numbers or begin
again.
00
<CONT.> <RENEW>
0001 0001
:
0005 0005
•
~
0006 0001
0010 0005
*
Formatted Memory Card or internal memory used for
both A and B.
[CONT.] : Pictures are stored beginning from the highest
file number stored on the last Memory Card or
internal memory used.
[RENEW] : Pictures are stored on each Memory Card
beginning with a file number 0001.
Each image will be numbered consecutively
from the last number used. So when recorded
images in the Memory Card are erased, the
number of the erased frame will not be used
again.
.--
IQI
100· 000l
L
r--
Frame number
File number
Directory number
81