FujiFilm Finepix J10 Basic Manual page 120

·:9:·
Increasing Monitor Brightness
Use this function to increase the brightness of the LCD
monitor temporarily when you have difficulty seeing the
monitor in low-light conditions or in daylight.
Increasing the LCD monitor
brightness
Press
-:9:·
(A)
to display the LCD monitor brightly.
Press
-:9:·
(A)
again to return to normal LCD monitor
brightness.
~
MEMO
• This function is automatically canceled after each shot.
• When this function is active, it will increase the amount
of speckling in images on the LCD monitor. This is
normal and does not affect the photographed image.
• This function is purely for checking the composition of
your shot. It does not increase the brightness of the
image.
• Even if you increase the brightness in low-light
conditions, you cannot check the subject.
• The color tones may vary depending on the subjects.
52
DIN 4
.~
blinks on the LCD monitor
when the function is on.