Sensor Mode Options; Clock Set - Yaesu VX-8DR Operating Manual

S M
ENSOR
C S
LOCK ET
The VX-8DR/DE has a 24-hour clock with a calendar which covers all dates from Janu-
ary 1, 2000 through December 31, 2099 (accuracy: ±30 sec/month).
To set the clock:
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 98: TIME
SET.
3. Press the key briefly to enable adjustment of this Menu
Item.
4. Rotate the DIAL knob to select the "year" setting.
5. Press the
select the "month" setting.
6. Repeat the above step to set the "day," "day of the week,"
"hour," and "minute" selections.
7. Press the
"Timer Signal" On (SIG) or Off (––). In the "SIG" mode, a
double-beep will be emitted from the speaker at the top of
each hour, as long as the transceiver is turned on.
8. Press the
9. When you have finished the time setup, press the PTT switch to save the new setting
and return to normal operation.
The VX-8DR/DE has a rechargeable Li-Ion battery cell used just for the
clock. Therefore, the VX-8DR/DE can maintain its clock data for approxi-
mately two months without using the main battery pack or external DC power.
120
ODE
S
ENSOR
key for one second to enter the Set Mode.
key briefly, then rotate the DIAL knob to
key briefly, then rotate the DIAL knob to set
key briefly, press the
M O
ODE PTIONS
key to start the clock from "00" seconds.
VX-8DR/DE O M
PERATING ANUAL