Parking Lamps; Powertrain Fault; High Beam; Hood Ajar - Ford 2016 Fusion Hybrid Owner's Manual

Heads Up Display
A red beam of lights appears on
the windshield in certain
E156133
instances when using adaptive
cruise control or the collision warning
system. To make sure the display works,
it will also appear momentarily when you
start your vehicle .

High Beam

Lights when you switch on the
high-beam headlamps. Flashes
when you use the headlamp
flasher.

Hood Ajar

Lights when the ignition is on and
the hood is not completely
E159324 closed.
Lane Keeping Aid
Lights when you activate the
lane keeping system.
E144813

Low Fuel Level

Lights when the fuel level is low
or the fuel tank is nearly empty.
Refuel as soon as possible.

Low Tire Pressure Warning

Lights when your tire pressure is
low. If the lamp remains on with
the engine running or when
driving, check your tire pressure
as soon as possible.
To confirm the lamp is working, it will also
light momentarily when you switch on the
ignition. If it does not light when you switch
on the ignition, or it begins to flash at any
time, have an authorized dealer check the
system.
Fusion Energi / Fusion Hybrid (CC7) Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV), Canada/United States of America, enUSA, First Printing
Instrument Cluster
(If Equipped)
(If Equipped)

Parking Lamps

Lights when you switch on the
parking lamps.

Powertrain Fault

Lights when your vehicle detects
a powertrain fault. Contact an
authorized dealer as soon as
possible.
Note: If your vehicle detects certain faults,
it will not allow you to operate the
accelerator pedal. If this happens, press the
brake pedal and release it. This will activate
limp home vehicle operation. In limp home
vehicle operation, your vehicle will
accelerate in a controlled manner up to a
maximum speed of 35 mph (56 km/h) on
a flat surface. If you apply the brake pedal
or move the transmission to neutral (N) you
can override your vehicle s acceleration.

Ready to Drive

Lights when you have switched
on the vehicle and it is ready to
E144692
drive. A corresponding message
may appear stating ready to drive.

Service Engine Soon

If the service engine soon
indicator light stays lit after the
you start the engine, it indicates
that the On Board Diagnostics system
(OBD) has detected a malfunction of the
vehicle emissions control system. Refer to
On board diagnostics (OBD) in the Fuel
and Refueling chapter for more
information about servicing your vehicle.
See Emission Control System (page 165).
94