Selecting Stereo/Sap Broadcasts; Adjusting The Audio 4Uality; Selecting The Optical Audio Output Tljl"Ll1Al - Toshiba 40G300U Owner's Manual

Chapter 6: Using the TV's features
3
Press'" or '" to select
Audio.
and then press
<lIlI
or
~
to select the desired service.
4
EXIT
Press O.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows
you to output high-fidelity stereo sound. MTS
also can tran"mit a second audio program (SAP)
containing a second language. music. or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast. the
word "STEREO" or "SAP" appear, on-screen when
RECALL.
d Th MTS
C •
I . o
IS
presse. e ,eature
'S
on yavailable
for analog signals on the
ANT/CABLE
input.
To listen to stereo sound:
1
MENU
Press 0 and open the
Sound
menu.
2
Highlight
Audio Setup
and press
8.
3
In the
MTS
field. select
Stereo.
4
To save the new settings. highlight
Done
and
press
8.
To reset the settings to the factory defaults.
highlight
Reset
and press
8.
Note:
• You can typically leave the TV in Stereo
mode because
it
will automatically output
the type of sound being broadcast (stereo
or monaural).
• If the stereo sound is noisy, select Mono to
reduce the noise.
To listen to an alternate language on an
ATSC digital station (if available):
Highlight the
Language
field in step 3 above. and
then press
<lIlI
or
~
to select the language you prefer.
To listen to a second audio program on an
analog station (if available):
Select
SAP
in step 3 above.
Note:
• A
second audio program (SAP) can be heard only
on those TV stations that offer it. For example, a
station might broadcast another language as a
second audio program. If you have SAP on, you
will see the current program on the screen but
hear the other language instead of the program
s
normal audio.
• If you have SAP on and the station you are
watching is not broadcasting
a
second audio
program, the stations normal audio will be
output. However, occasionally there is no sound
at all in SAP mode. If this happens. set the MTS
feature to Stereo mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the
bass. treble, and balance.
To adjust the audio quality:
1
MENU
Press 0 and open the
Sound
menu.
2
Highlight
Audio Settings
and press
8.
3
Press'" or ... to highlight the item you want to
adjw,t
(Bass. Treble,
or
Balance).
4
Press
<lIlI
or ~ to adjust the level.
• <lIlI
makes the bass or treble weaker or
increases the balance in the left channel
(depending on the item selected).
•
~
makes the bass or treble stronger or
increases the balance in the right channel
(depending on the item selected).
5
To save the new settings. highlight
Done
and press
8.
To reset the settings to the factory defaults,
highlight
Reset
and press
8.
Selecting the optical audio output
format
You can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder or other digital audio ,ystem to the
Optical
Audio Out
terminal on the TV (see "Connecting a
digital audio ,y,tem" on page 18).
To select the optical audio output format:
1
MENU
Press 0 and open the
Sound
menu.
2
Highlight
Audio Setup
and press
8.
3
In the
Optical Output Format
lield, select either
Dolby Digital
or
peM.
depending on your device.
4
To save the new settings. highlight
Done
and press
8.
To revert to the factory default,. highlight
Reset
and press
8.
(COII/illlled)
45 I