Scrolling The Theaterwide" Picture (Theaterwide 2 And 3 Only); Using The Auto Aspect Ratio Feature - Toshiba 40G300U Owner's Manual

Chapter 6: Using the TV's features
Picture Size
Native
(for 480i (HOMI), 480p (HOMI), 720p,
1080i, and 1080p signal programs)
p-uq~10
°°1
~
000
• If receiving a 480i (HOM I), 480p (HOM!), nop,
I080i, or 1080p signal program, Native mode scales
the video to display the entire picture within the
borders of the screen (i.e. no overscanning).
• This is especially useful for external HO sources
such as OYHS movies. or PC graphics.
Note:
• This mode is supported only for HDMI
(1080p,1080i, 720p, 480p, and 480i), ColorStream
(1080i and 720p), and ANT / CABLE (digital)
inputs (1080p, 1080i, and 720p).
• Depending on the input signals, the border of
the picture may be hidden, displayed in black,
or noisy
To set the scroll settings:
1
MENU •
Press
0
and open the
Picture
menu.
2
Highlight
Theater Sellings
and press@.
3
In the
Picture Size
tield, select either
TheaterWide
2 or
TheaterWide 3
(you cannot scroll in any other
mode).
4
Press
T
to highlight the
Picture Scroll
tield.
5
Press'" or
~
to scroll the picture up and down as
needed.
6
To save the new settings, highlight
Done
and
press @. To revert to the factory defaults,
highlight
Reset
and press @.
Note: When receiving
a
signal at 480i
resolution, the picture scroll function may have
limited adjustment range.
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to
On,
the
TY will automatically select the picture size when
one of the following input sources is received:
• A 480i, 480p. nop, 1080i digital signal from the
ANT/CABLE
input
• A 480i signal from the
VIDEO 1
or
VIDEO 2
input
• A 480i signal from the
ColorStream HD
input
• A 480i, 480p, nop, 1080i, 1080p, or YGA (60Hz)
signal from the
HDMI1/2/3/4
input
Note: The auto aspect ratio feature is not
applicable to
PC
input.
Dot by Dot
(for VGA, SVGA, XGA, WXGA, and
SXGA sources only)
000
000
The "Dot by Dot" picture is non-scaling display.
Depending on the input signal formats, picture is
displayed with sidebars and/or bars at the top and
bottom. (Example: YGA input source)
*
To view the hidden areas (such as subtitles or
captions), see below "Scrolling the TheaterWide®
picture".
Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2
and TheaterWide 3 modes for each input.
Aspect ratio of
signal source
4:3 normal
4:3 letter box
16:9 full
Not detined (no
10-1 data or
HDMI aspect data)
Automatic aspect size
(automatically selected when
Auto Aspect is On)
alural (with sidebars)
TheaterWide 2
Full
The current picture size you
set under "Selecting the
picture size" on page 39.
(continued)
41
I