Connecting Optional Equipment - Sony KDL-26U2000 Service Manual

Connecting optional equipment

You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.
Connecting to the TV (side)
S VHS/Hi8/DVC
camcorder
Headphones
To connect Do this
Conditional Access To use Pay Per View services.
Module (CAM) A
For details, refer to the instruction
manual supplied with your CAM.
To use the CAM, remove the
rubber cover from the CAM slot.
Switch off the TV when inserting
your CAM into the CAM slot.
When you do not use the CAM, we
recommend that you replace the
cover on the CAM slot.
S VHS/Hi8/DVC Connect to the S video socket
camcorder B
4 or the video socket 4,
and the audio sockets 4. To
avoid picture noise, do not connect
the camcorder to the video socket
4 and the S video socket
4 at the same time. If you
connect mono equipment, connect
to the L socket 4, and set
"Dual Sound" to "A" (page 21).
Headphones C Connect to the i socket to listen to
sound from the TV on headphones.
Connecting to the TV (rear)
PC
DVD player
Digital
satellite
receiver
DVD player
with component output
DVD recorder
Hi-Fi
VCR
Decoder
Video game equipment
DVD player
Decoder
To connect Do this
PC D
Connect to the PC /
sockets. It is recommended to use
a PC cable with ferrites.
Digital satellite Connect to the HDMI IN 6 socket
receiver or DVD if the equipment has a HDMI
player E
socket. The digital video and audio
signals are input from the
equipment. If the equipment has a
DVI socket, connect the DVI
socket to the HDMI IN 6 socket
through a DVI - HDMI adaptor
interface (not supplied), and
connect the equipment's audio out
sockets to the audio in HDMI IN 6
sockets.
Notes
• The HDMI sockets only support
the following Video inputs: 480i,
480p, 576i, 576p, 720p and
1080i. To connect a PC, please
use the PC input socket.
• Use HDMI certified cable with
HDMI logo.
DVD player with Connect to the component sockets
component output and the audio sockets / 3.
F
Video game Connect to the scart socket /
equipment, DVD 1. When you connect the
player or decoder decoder, the scrambled signal from
G
the TV tuner is output to the
decoder, then the unscrambled
signal is output from the decoder.
DVD recorder or Connect to the scart socket /
VCR that supports 2. SmartLink is a direct link
SmartLink H
between the TV and a VCR/DVD
recorder.
Hi-Fi audio Connect to the audio output
equipment I
sockets to listen to the sound
from the TV on Hi-Fi audio
equipment.