Sound Adjustment Menu; Features Menu - Sony KDL-26U2000 Service Manual

Sound Adjustment menu

Sound Adjustment
Sound Effect Standard
Treble 50
Bass
50
Balance
0
Reset
Dual Sound Mono
On
Auto Volume
On
TV Speakers
Back: Select: Enter: Exit:
MENU
Sound Effect Selects the sound mode.
• " Standard": Enhances clarity, detail, and sound presence by using "BBE High definition
Sound System."
• "Dynamic": Intensifies clarity and sound presence for better intelligibility and musical
realism by using the "BBE High definition Sound System."
• "BBE ViVA": BBE ViVA Sound provides musically accurate natural 3D image with Hi-Fi
sound. The clarity of the sound is improved by BBE while the width depth and height of
sound image are expanded by BBE's proprietary 3D sound process. BBE ViVA Sound is
compatible with all TV programs including news, music, dramas, movies, sports and
electronic games.
"
• "Dolby Virtual : Uses the TV speakers to simulate the surround effect produced by a multi
channel system.
• "Off": Flat response.
Tips
• You can change sound effect by pressing 9 repeatedly.
• If you set "Auto Volume" to "On", "Dolby Virtual" changes to "Standard".
Treble
Adjusts higher-pitched sounds.
Bass
Adjusts lower-pitched sounds.
Balance Emphasizes left or right speaker balance.
Reset
Resets all the sound settings to the factory settings.
Dual Sound
Selects the sound from the speaker for a stereo or bilingual broadcast.
• "Stereo", "Mono": For a stereo broadcast.
• "A"/"B"/"Mono": For a bilingual broadcast, select "A" for sound channel 1, "B"
for sound channel 2, or "Mono" for a mono channel, if available.
Tip
If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "A" or "B".
Auto Volume Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend
to be louder than programmes).
You can select the options listed below on the
Sound menu. To select options in "Settings",
see "Navigating through menus" (page 19).

Features menu

Features
Screen
Power Saving Standard
AV2 Output TV
RGB Center 0
PC Adjustment
Timer
Back: Select: Enter: Exit: MENU
Screen Changes the screen format.
• "Auto Format": Automatically changes the screen format according to the
broadcast signal.
• "Screen Format": For details about the screen format, see page 14
• "Vertical Size": Adjusts the vertical size of the picture when the screen format is
set to Smart.
Tips
• Even if you have selected "On" or "Off" in "Auto Format", you can always modify the
format of the screen by pressing
• "Auto Format" is available for PAL and SECAM signals only.
Power Saving
Selects the power saving mode to reduce the power consumption of the TV.
• "Standard": Default settings.
• "Reduce": Reduces the power consumption of the TV.
• "Picture Off": Switches off the picture. You can listen to the sound with the picture
off.
AV2 Output
Sets a signal to be output through the socket labelled
TV. If you connect a VCR to the
equipment connected to other sockets of the TV.
• "TV": Outputs a broadcast.
• "Auto": Outputs whatever is being viewed on the screen.
RGB Center
Adjusts the horizontal picture position so that the picture is in the middle of the
screen.
Tip
This option is only available if an RGB source has been connected to the Scarts connectors
1/ 1 or 2/
You can select the options listed below on the
Features menu. To select options in "Settings",
see "Navigating through menus" (page 19).
repeatedly.
/ 2 on the rear of the
/ 2 socket, you can then record from the
2 on the rear of the TV.