Mercedes-Benz E-Class Coupe Operator's Manual page 179

Activating the HOLD function
X
Make sure that the activation conditions
are met.
X
Depress the brake pedal.
X
Quickly depress the brake pedal further
HOLD
until display : appears in the
multifunction display.
The HOLD function is activated. You can
release the brake pedal.
i If depressing the brake pedal the first
time does not activate the HOLD function,
wait briefly and then try again.
G
WARNING
The vehicle's brakes are applied when the
HOLD function is activated. For this reason,
deactivate the HOLD function if the vehicle is
to be set in motion by other means (e.g. in a
car wash or by towing).
Deactivating the HOLD function
The HOLD function is deactivated
automatically if:
you accelerate and the transmission is in
R
position D or R.
you shift the transmission to position P.
R
you apply the brakes again with a certain
R
amount of pressure until
from the multifunction display.
you activate DISTRONIC PLUS.
R
G
WARNING
Never get out of the vehicle when the HOLD
function is activated.
The HOLD function must never be operated
or deactivated by a passenger or from outside
the vehicle.
You will see a warning message in the
multifunction display if the HOLD function is
activated and:
R
R
R
Shift to 'P'
X
A horn will also sound at regular intervals if
the HOLD function is activated and you:
HOLD R
disappears
R
The sounding of the horn alerts you to the fact
that the vehicle has been parked while the
HOLD function is still activated. If you attempt
to lock the vehicle, the tone becomes louder.
The vehicle is not locked until the HOLD
function is deactivated.
I n f o r ma t i o n P r o v i d e d b y :
Driving systems
The HOLD function does not replace the
parking brake and must not be used for
parking.
The braking effect of the HOLD function is
canceled and the vehicle could roll away if:
the HOLD function is deactivated by
R
depressing the accelerator pedal or the
brake pedal.
there is a malfunction in the system or an
R
interruption in the power supply, e.g.
battery failure.
the electrical system in the engine
R
compartment, the battery or the fuses are
tampered with.
the battery is disconnected.
R
If you leave the vehicle or park it, deactivate
the HOLD function and secure the vehicle
against rolling away.
the driver's door is open and the driver's
seat belt is unfastened.
the engine is switched off.
the hood is opened.
Move the selector lever to P to prevent the
vehicle from rolling away.
The HOLD function is deactivated. The
warning message in the multifunction
display disappears.
switch the engine off, open the driver's
door and take off your seat belt
open the hood
177
Z