Memory Function - Mercedes-Benz E-Class Coupe Operator's Manual

Hide thumbs Also See for E-Class Coupe:
Table of Contents

Advertisement

exterior mirror to a position which
allows you to see the rear wheel and
the curb.
X
Press memory button M ? and one of
the arrows on adjustment button =
within three seconds.
The parking position is stored if the
exterior mirror does not move.
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position
setting
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Adjust the exterior mirror on the front-
passenger side with the corresponding
button (
Y
page 110).
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 6 mph
R
(10 km/h)
about ten seconds after you have
R
disengaged reverse gear
if you press button : for the exterior
R
mirror on the driver's side

Memory function

Storing settings
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
driver's side: steering wheel position
R
driver's side: position of the exterior
R
mirrors on the driver's and front-passenger
sides
G
WARNING
Do not activate the memory function while
driving. Activating the memory function while
driving could cause the driver to lose control
of the vehicle.
X
Adjust the seat (
X
On the driver's side, adjust the steering
Y
wheel (
page 109) and the exterior mirrors
Y
(
page 110).
X
Press memory button M and one of the
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.
Calling up a stored setting
X
Press and hold the relevant storage
position button 1, 2 or 3 until the seat,
steering wheel and exterior mirrors are in
the stored position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
I n f o r ma t i o n P r o v i d e d b y :
Memory function
Y
page 104).
113
Z

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-class cabriolet

Table of Contents