Automatic Configuration; Accessing The Automatic Configuration Page - Matrox Monarch HD User Manual

24
Select Automatic .
1
Enter a local or public NTP server address. The default NTP server address
2
is time.nrc.ca.
Select a Time zone from the list. The current date and time associated with
3
the selected NTP server and time zone are displayed next to Current date
and time
4 Click Apply . You'll be notified that Monarch HD will be rebooted in order
to apply the changes.

Automatic configuration

The Automatic configuration page in the Command Center is where you can
export the current Monarch HD settings to an XML file (called the Monarch HD
configuration file), import settings from a previously-created configuration file,
or import settings from the same XML hosted on a web page URL.
When you have a Monarch HD configuration file, you can also copy it to a USB
device, connect the device to USB port 2, and perform a factory reset to
automatically load the settings. For more information on performing a factory
reset, see
The option to boot up Monarch HD with all settings loading automatically from a
USB device, or loading settings from a web page URL at device reboot, allows
you to deploy other Monarch devices without logging in to the Command Center.

Accessing the Automatic configuration page

To access the Automatic configuration page , open the Monarch HD
Command Center (see
choose Device > Automatic configuration .
Chapter 4, Specifying Settings and Using the Command Center
.
"Network connection and IP address"
"Accessing the Command Center"
on page 16.
on page 19), and then