Setting The Device Date And Time; Accessing The Date And Time Page; Setting The Date And Time Manually; Setting The Date And Time Automatically - Matrox Monarch HD User Manual

By default, the Monarch HD username and password are set to admin. The
device username cannot be changed, however, we do suggest that you change the
device password. To change the Monarch HD password, enter the current and
new passwords and then click Change . For information on resetting the
password to factory default, see

Setting the device date and time

The Date and Time page in the Command Center lets you set the date and time
for your Monarch HD device. You can set the date and time manually or
automatically by using an NTP server. The date and time are used in the naming
of the recorded files (see
¡ Important To save changes made in the Date and Time page, you must click
the Apply button. A Monarch HD hardware reboot is required to apply the
changes. If you leave the Date and Time page before clicking Apply , all
changes will be lost.

Accessing the Date and Time page

To access the Date and Time page, open the Monarch HD Command Center
(see "Accessing the Command Center"
Date and Time

Setting the date and time manually

Select Manual .
1
Set the Time , and enter a Date in the format DD/MM/YYYY, or click
2
select a date from the calendar.
Click Apply . You'll be notified that Monarch HD will be rebooted in order
3
to apply the changes.

Setting the date and time automatically

Setting the date and time automatically requires a local or public NTP server
address. An Internet connection is required to use a public NTP server.
"Reset to factory defaults"
"Path and filename"
.
on page 12.
on page 38).
on page 19), and then choose Device >
Setting the device date and time
23
to