22
Introduction
The Monarch HD Command Center is a web-based application that allows you to
configure Monarch HD settings, control streaming and recording sessions, and
import/export settings to or from other devices.
¦ Note You must know the Monarch HD IP address to access the Command
Center (see
Device name and password
The Account page in the Command Center is where you give a descriptive name
to your Monarch HD device and change your Monarch HD password.
Accessing the Account page
To access the Account page, open the Monarch HD Command Center (see
"Accessing the Command Center"
Account
Device name
By default, the device name is set to Monarch HD. You can give a unique name to
each Monarch HD device for easy identification within the Command Center and
the Matrox Monarch Finder utility. This is especially useful when you have
multiple Monarch HD devices on the same network. To change the name of your
Monarch HD, type the desired name in the Device name box, and then click
Change
Username and password
A username and password are required to access the options and features in the
Monarch HD Command Center. Apart from the Status and About pages, which
can be viewed without logging in, a username and password are required to
access all other Command Center pages, such as the Control and Stream
Settings
Chapter 4, Specifying Settings and Using the Command Center
"Accessing the Command Center"
.
.
pages.
on page 19).
on page 19), and then choose Device >