4. HDMI UNIT ASSY
Proceeding :
CABINET TOP
(1) Remove the screws, then remove the BACK PANEL and the HDMI BRACKET.
Direction of photograph: A
(2) Cut wire clamp band, then disconnect the connector wires and the FFC cables. Remove the screws and the
SUPPORTER P.C..
Remove the PCB SIRIUS and the PCB RS232 from the PCB SIDE CNT(Board to board).
HDMI UNIT ASSY
PCB SIRIUS
PCB 232C
HDMI UNIT ASSY
STYLE PIN : Loose
cut
N4201
12
CUSHION BRACKET
SUPPORTER P.C.
BACK PANEL
FFC cable
HDMI BRACKET