Installation / Environmental Conditions - Kauo Heng KH-300 Operation Manual

KAUO HENG

3. Installation / Environmental conditions

Please install the machine as below instructions, in order to use and keep
this machine good working condition.
KH-300
Do not install the machine at a place subject to direct
sunshine and/or adjacent to a heat generation source
such as a furnace/oven.
Do not install the machine at a place subject to rapid
temperature changes.
The temperature should be 0℃~ 35℃.
Do not install the machine at a place where there is a
lot of dust and dirt, or a location affected by chemical
gases, sea breeze etc.
Do not install the machine at a place subject to
excessive moisture.
The humidity should be 30 ~ 80%.
Do not install the machine on a slope or unstable place.
Please connect the electric power and make sure the
ground wire is connected correctly.
COMPUTERIZED FLAT KNITTING MACHINE
3
OPERATION MANUAL