Specification - Kauo Heng KH-300 Operation Manual

KAUO HENG

2. Specification

MODEL
GAUGE
KNITTING WIDTH
CAM SYSTEM
KNIITING SPEED
YARN CARRIERS
NEEDLE SELECTION
TRANSFER
NEEDLE BED
SINKER SYSTEM
STITCH DENSITY
RACKING
FABRIC TAKE DOWN
STOP MOTION
DRIVE
TOP TENSIONS
YARN FEED UNIT
SAFETY COVER
OPERATION LAMP
FLUORESCENT LAMP
CONTROLLER
DATA INPUT
OPERATION &DISPLAY
PATTERN MEMORY
POWER
KH-300
COMPUTERIZED FLAT KNITTING MACHINE
KH－300
3G, 3.5G, 4G
46"（117CM）
80"（203CM）
Single system, twin carriage
Knitting system three-way technique and transfer with split stitch function.
Max 1.2 m/sec.
12 yarn carriers on 3 double rails.
Full jacquard selection via special solenoids.
Simultaneous transfer, front or back, independent of carriage direction.
Split knitting.
Replaceable segment needle bed.
Moveable sinker equipment.
30 levels independent selection, electronic control with stepping motor
00-180 steps.
Racked by servo motor and high precision ball screw system.
Racking 1/2 pitch also available from any position.
Main roller / Sub roller:
32 levels changeable speed, automatically adjustable on each level.
Yarn break, knot, press off, needle break, shock, over torque, piece count,
over run, program error etc.
AC servo motor, tooth shape driving belt, no oil needed.
Variable adjustable programmable speed levels.
Electronic top tensions easy to thread the yarn through.
Auto positive feeding device on each left / right side.
Full safety cover for anti-noise and dust proofing.
Emergency stop buttons.
Green: normal operation.
Yellow: abnormal / manual stop.
Inside safety cover and take-down.
USB
LCD display screen, Chinese and English versions available.
1024 x 4096 huge memory
3 phase AC 220V 50 / 60 HZ
2
5G, 7G, 10G, 12G, 14G
60"（152CM）
80"（203CM）
60"：Double system one carriage
80"：Single system, twin carriage.
OPERATION MANUAL