Cleaning - Kauo Heng KH-300 Operation Manual

KAUO HENG

10. Cleaning

Maintenance: daily
a. Clean the yarn dust on the needle, sinker, yarn carrier, yarn carrier rail,
carriage, latch brush and top tension and clean the filter.
b. Clean up the needle bed daily and clean out the yarn dust on the needle
bed.
c. Clean out the yarn dust on the yarn carrier rail and oil the jack, select jack,
selector and both sides of the carriage.
d. Put on the cover. Cleaning Filter：Filters are equipped in the controller and
in the parts of main motor, it prohibits dust to come inside. Please take out
the filter and dust it off.
e. After unpacking and locating the machine in the factory, it must be leveled
carefully with a spirit-level to avoid machine distortion in running.
Carriage guide sliders ( front and
Needle bed ( front and back ),
jack, select jack, and selectors
Inside of carriage
Ball screw unit
KH-300
Where to oil
Carrier rails
Carriage rails
back )
COMPUTERIZED FLAT KNITTING MACHINE
Filter
Fig.10.1
Every 8 to 12 service hours
Every 8 to 12 service hours
Every 8 to 12 service hours
Every 8 to 12 service hours
28
Interval
Every month
Every month
OPERATION MANUAL