Mx-Fwx1; Unpacking; Installation - Sharp MX-M623N Installation Manual

[10] MX-FWX1

MX-M753N

1. Unpacking

A. Check the packed items
1
No. Packed part names
1 CD-ROM
2 Product key sheet

2. Installation

<Note before installation>
• In order to enable the Internet Fax send function, the product key
must be acquired.
• In order to specify the address of the Internet Fax with the PC-
FAX driver, the PC-FAX driver must be updated by the Internet
Fax expansion kit.
A. Preparation for enabling the Internet Fax send
function
1) In order to enable the Internet Fax send function, enter the
product key by the key operation on the operation panel.
a) Press the system setting key on the operation panel.
b) Select page 2/2 of the system setting, and touch [Product
key input] key.
c) Touch the input column.
d) Enter the product key with numeric key (10-key), and
touch [Registration] key.
2) After completion of entry of the product key, turn OFF the
power switch on the operation panel. Turn OFF the main
power switch, then turn ON the power switch and the main
power switch again.
* After completion of 1) and 2), the Internet Fax send function
from the main unit becomes enable. To enable the Internet
Fax send with the PC-FAX driver, the following steps 3) and
4) are required.
3) Use the CD-ROM packed together with the machine to install
the PC-FAX driver.
For installing procedures, refer to the software setup guide.
4) Update the PC-FAX driver with the CD-ROM packed together
with the machine.
* Install and setting of the driver to the PC server must be per-
formed by the user or by the request from the user.
B. Operation check of the Internet Fax send
function
1) After completion of entry of the product key, check to confirm
that the Internet Fax send is performed normally from the
machine.
2) After completion of update of the PC-FAX driver, press the
print button on the test page of the PC-FAX driver to check to
confirm that the Internet Fax send is performed normally.
2
Quantity
1
1
MX-M753N MX-FWX1 10 – 1
Service Manual