Temperature & Humidity Sensor; Wind Sensor; Assembly Part; Accessories - Sensors - Oregon Scientific WMR300 User Manual

TEMPERATURE & HUMIDITY SENSOR
1 x Thermo/hygro casing
with sensor installed
(THGN300)

WIND SENSOR

1 x Wind cups
(with 2 x lock washer & 2 x flat washer
1 x Wind sensor unit
(WGR300)
ASSEMBLY PARTS
2 x Screws (Type A, with 2 x
lock washer & 2 x flat washer)

ACCESSORIES - SENSORS

The system can expand up to 8 thermometer & humidity sensors and be compatible
with other weather sensors. Optional wireless remote sensors (coming soon) such
as those listed below can be purchased separately. For more information, please
contact your local retailer.*
• Wireless repeater (Expand the transmission range)
• UV sensor (UV index & UV dose)
• Solar radiation sensor (Solar radiation, THSW & Evapotranspiration (ET))
• Aspirated fan (Increase accuracy of temp/humidity sensor)
• Soil/Leaf sensor (Soil moisture/temperature & Leaf wetness)
* Features and accessories will not be available in all countries.

OVERVIEW

MAIN UNIT

1
Figure 1 - Front View
1. LCD display
2. Antenna
3 x Screws
(Type B, with 3 x lock washer
& 3 x flat washer)
1 x Wind vane
4 x Nylon cable tie
1 x U-bolt
& 2 x hex nut)
1 x Screw driver
2
1
Figure 2 - Back View
1. Battery compartment
2. USB socket
3. Power adapter socket
4. Backlight (continuous) slide switch ON/OFF
5. RESET: Reset unit to default settings
6. EU/UK slide switch (WMR300 only)

TRANSMITTER BOX

1
Figure 3 - Front View
1. Solar panel
2. Antenna
3. Screw holes
Figure 4 - Back View
1. Cable slot
2. Rubber stopper
3. Mounting bracket
4. Mounting ring
1 2
3
4
5
RESET KEY UV
6 7 8
Figure 5 – Inside View
2
2 3
4 5 6
2
3
3
4
1 2
13
SOLAR RAIN TH WIND
9 10 11 12