Panasonic SA-AK340EE Service Manual page 5

SA-AK340EE
The error code is automatically display after entering into self-diagnostic mode.
Error Code Diagnosis Contents Description of error
H01 Mode SW, plunger
and capstan motor
abnormal
H02 Rec INH SW
abnormal
H03 HALF SW abnormal
F01 Reel pulse abnormal
F02 TPS error
F15 RESET SW
abnormal
F26 Transmission error
between CD Servo
LSI IC and
microprocessor IC
F61 Power Amp IC output
abnormal
IHMS Cam gear
abnormality
ICSL Cam gear/gear units
abnormal
ISTK Drive rack/gear
assembly abnormal
IPLY Drive rack/gear
assembly abnormal
REST SW: ON is not
detected within the
specified time.
When set to CD mode, the
sense signal does not turn
"Low", a fail safe time after
system command
transmission is sent.
Upon power on,
PCONT=HIGH, DCDET=L
after checking LSI.
Cam gear does not rotate
to "HOME" position.
Cam gear does not rotate
to "PLAY" driving position
and hence does not drive
playing tray to "STOCK"
position.
The tray drive rack does not
move to "STOCK" position.
(Tray does not move to
"STOCK" position)
The tray drive rack does not
move to "PLAY" position.
(Tray does not move to
"PLAY" position)
Automatic FL Display
18
Remarks
For deck mechanism unit (For deck 1/2).
Press [ ] on main unit for
next error.
For deck mechanism unit (For deck 2).
Press [ ] on main unit for
next error.
For deck mechanism unit (For deck 1/2).
Press [ ] on main unit for
next error.
For deck mechanism unit (For deck 1/2).
Press [ ] on main unit for
next error.
For CD unit (For Traverse).
Press [ ] on main unit for
next error.
For CD unit (For Traverse).
Press [ ] on main unit for
next error.
For power.
Press [ ] on main unit for
next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.