Table of Contents
Advertisement
Press the volume up and then use the channel up/
down buttons to select the off timer option. Press
volume up and use the channel up/down buttons to
set the turn off hour. Press the volume up and use the
channel up/down buttons to set the minutes.
Use the volume up button to select Hold or Run. Hold
means the off Timer feature is not active and Run means
it is. The timer starts when you press the Enter button.
ON TIMER
This timer function operates only if current time has
been already set. In the Timer menu, press the volume
up and then use the channel up/down buttons to select
the on timer option. Press the volume up and then
use the channel up/down buttons to set the hour.
Timer
CH.
Clock
G
Off-timer
G
On-timer
G
Adjust
Move
Press the volume up and then the channel up/down
buttons to select minute you want to set. Press the
volume up button and then use the channel up/down
buttons to select the channel at turn-on. Press the
volume up button and then use the channel up/down
buttons to select the volume you want.
Use the volume up button to select Hold or Run. Hold
means the on Timer feature is not active and Run means
it is. The timer starts when you press the Enter button.
If the on-timer function is active (Run), the current
channel will change to the set channel when the on-
timer is activated. Unless a button is pressed within
three hours after the TV is turned on by the on-timer
function, the TV will automatically turn off. The TV
must be in standby mode for the on timer to work.
SLEEP TIMER
Use the sleep button to set the sleep timer. Each press
of the sleep button changes the setting as shown
below. Sleep timer turns the TV off at the preset time.
To cancel sleep time setting, press the sleep button
repeatedly to select [ — ]. The screen display of SLEEP
appears on the screen for 20 seconds prior to TV turn
off.
CM154 - 923-03495
USER MENUS
-- : --
7
AM TV 3
Vol 30
Run
Back
Sleep
- - -
240
180
120
When the sleep time you want is displayed on the
screen, don't press the sleep button again. To check
the remaining sleep time, press the sleep button once.
To change sleep time setting, press the sleep button
repeatedly to select time setting you want. If you turn
the TV off after setting the sleep timer, the setting
will be erased.
VIDEO
APC (AUTO PICTURE CONTROL)
APC adjusts the TV to the best picture appearance.
Use the menu button to select the Picture menu. Press
the volume up and then use the channel up/down
buttons to select the APC option.
Picture
CH.
APC
DRP
User
Move
Clear
User
Press the volume up and then use the channel up/
down buttons to select your desired picture
appearance from Clear, Optimum, User, and Soft. Each
press of channel up/down buttons changes the screen
display. Press the enter button to select and exit.
10
---
10
20
30
90
60
Clear
Clear
Optimum
Soft
User
Back
Optimum
Soft
ZLD15A1B - MENUS
Advertisement
Table of Contents
