Optical Parts Disassembly - Sanyo PLC-XU116 Service Manual

Optical Parts Disassembly

Before taking this procedure, remove Cabinet Top , Cabinet Front and Main Board following to the "Mechanical Disas-
sembly".
Disassembly requires a 2.0mm hex wrench.
1. Projection lens disassembly
Note: The optical unit should be removed from the cabinet bottom before removing the projection lens.
(M2.5x8)x4
2. Integrator lens-in disassembly
(M2.5x5)x2
Projection lens
Fig.1
Integrator Lens-In Ass'y
Integrator lens-in
* Rugged surface
(Behind)
Fig.2
-18-
Optical unit
Hooks