Installing A Child Seat With A Tether - Acura EL 2005 Owner's Manual

Installing a Child Seat
Installing a Child Seat with a
Tether
COVER
ANCHOR
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchor shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
44
Using an Outer Anchor
TETHER STRAP
HOOK
ANCHOR
1. After properly securing the child
seat with the lap/shoulder belt
(see page 42 ), lift the head
restraint, then route the tether
strap over the seat-back.
2. Lift the anchor point lid, then
attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
3. Tighten the strap according to the
seat maker's instructions.