Installing A Child Seat With A Tether - Acura 2010 TSX Owner's Manual

Installing a Child Seat
Installing a Child Seat with a
Tether
TETHER ANCHORAGE POINTS
ANCHOR COVER
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
50
Using an Anchor
TETHER STRAP HOOK
Outer Position
ANCHOR
1. Set the head restraint to its
highest position.
2. After properly securing the child
seat (see page 48 ), route the
tether strap over the seat-back and
through the head restraint legs.
2010 TSX
TETHER STRAP HOOK
ANCHOR
Center Position
3. Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
4. Tighten the strap according to the
seat maker's instructions.