Vesa Mounting Plate - HP EliteOne 705 G1 Maintenance & Service Manual

VESA mounting plate

The VESA mounting plate is located under the stand and under the lower rear panel.
To remove the VESA mounting plate:
1. Prepare the computer for disassembly (see
2. Remove the stand (see
3. Remove the access panel (see
4. Remove the lower rear panel (see
5. Remove the four Torx screws (1) securing the plate to the chassis.
72 Chapter 5 Removal and Replacement Procedures
Preparing to disassemble the computer on page
Stand on page 29).
Access panel on page
Lower rear panel on page
33).
59).
27).
ENWW