Disassembly Procedures - Harman Kardon AVR65 Service Manual

DISASSEMBLY PROCEDURE DISASSEMBLY PROCEDURE
1. Removing the top cover, and
Remove screws
2. Removing the front panel, and
Remove screws
3. Removing the rear panel, and
Remove screws
MAIN AMP PCB BLOCK MAIN AMP PCB BLOCK
1. Remove all of the screws on Rear panel.
2. Remove the Rear panel.
3. Remove PCB Brk t and Guide
4. Remove all of the screws that connect with main Ass y.
5. Remove the Main PCB block.
POWER PCB BLOCK POWER PCB BLOCK
1. Remove PCB Brk t and Guide
2. Remove 4 screws for Power PCB mounting
3. Remove the POWER PCB block.
SUB PCB BLOCK SUB PCB BLOCK
1. Remove 4 screws on Rear panel.
2. Remove the Rear panel.
3. Remove PCB Brk t and Guide
4. Remove the SUB PCB block.
FRONT PCB BLOCK FRONT PCB BLOCK
1. Remove Main Ass y.
2. Remove volume and rotary knob from the front
3. Remove all of the screws on back side of Front function PCB.
4. Remove the Front function PCB.
Brk t from Main Ass y.
Brk t from Main Ass y.
Brk t from Main Ass y.
Ass y.
- 17 -
4. Removing the main PCB block, and
Remove screws
5. Removing the power PCB block, and
Remove
6. Removing the sub PCB block, and
Remove screws