Page 1 2 0 1 1 CONVERTIBLE O W N E R ’ S M A N U A L...
Page 2 With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and features and equipment that are either standard or op- the name Chrysler Canada Inc. used in substitution tional on this vehicle.
Page 3: Table Of Contents
TABLE OF CONTENTS SECTION PAGE ............3 INTRODUCTION .
Page 5 INTRODUCTION CONTENTS Introduction ......4 Vehicle Identification Number ....6 How To Use This Manual .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR parts, and cares about workmanship, distinctive styling, and high quality - all your satisfaction.
Page 7 INTRODUCTION 5...
Page 8: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ To Arm The System ....17 A Word About Your Keys ....12 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Remote Open Window Feature — If ▫ Wind Buffeting ..... . . 35 Equipped .
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Enhanced Seat Belt Use Reminder System ▫ Child Restraints ..... . 68 (BeltAlert ) .
Page 14: A Word About Your Keys
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key Removal The authorized dealer that sold you your new vehicle has Place the shift lever in PARK. Turn the ignition switch to the key code numbers for your vehicle locks. These the ACC position, push the key slightly inward, rotate the numbers can be used to order duplicate keys from your key to the LOCK position, and remove the key.
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: switches, radio, hands–free system (if equipped), and • If you try to remove the key before you place the shift power outlets will remain active for up to 10 minutes lever into PARK, the key may become trapped tempo- after the ignition switch is turned to the LOCK posi- rarily in the ignition switch lock cylinder.
Page 16: Key-In-Ignition Reminder
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SENTRY KEY WARNING! (Continued) The Sentry Key Immobilizer System prevents unauthor- • Do not leave children or animals inside parked ized vehicle operation by disabling the engine. The vehicles in hot weather. Interior heat build-up may system does not need to be armed or activated.
Page 17: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 During normal operation, after turning the ignition CAUTION! switch to ON/RUN, the Vehicle Security Light will turn on for three seconds for a bulb check. If the light remains The Sentry Key Immobilizer system is not compat- after the bulb check, it indicates that there is a problem ible with some after-market remote starting systems.
Page 18: Customer Key Programming
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • This device must accept any interference that may be authorized dealer or by using the Customer Key Pro- gramming procedure. This procedure consists of pro- received, including interference that may cause unde- gramming a blank key to the vehicle electronics.
Page 19: Rearming The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Rearming The System Security Alarm is arming. During this period, if a door is If something triggers the alarm, and no action is taken to opened, the ignition switch is turned to ON/RUN, or the disarm it, the Vehicle Security Alarm will turn off the power door locks are unlocked in any manner, the horn after three minutes, turn off all of the visual signals...
Page 20: Illuminated Entry - If Equipped
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the Vehicle Security Alarm is armed and the battery • The driver’s door key cylinder and the trunk button on becomes disconnected the Vehicle Security Alarm will the RKE transmitter cannot arm or disarm the Vehicle remain armed when the battery is reconnected.
Page 21: Remote Keyless Entry (Rke)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 This feature also turns on the approach lighting (if NOTE: • The line of transmission must not be blocked with equipped). Refer to “Electronic Vehicle Information Cen- ter (EVIC)/Personal Settings (Customer-Programmable metal objects when using the RKE transmitter. Features)”...
Page 22: To Unlock The Doors
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the To Unlock The Doors Press and release the UNLOCK button on the RKE following procedure: transmitter once to unlock the driver’s door or twice to 1.
Page 23 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 activated will cause the alarm to sound. Press the UN- 1. Press and hold the UNLOCK button on a programmed LOCK button to deactivate the Vehicle Security Alarm RKE transmitter for at least four seconds, but not longer System.
Page 24: To Lock The Doors
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Illuminated Approach — If Equipped Sound Horn With Lock This feature activates the headlights for up to 90 seconds This feature will cause the horn to chirp when the doors when the doors are unlocked with the RKE transmitter. are locked with the RKE transmitter.
Page 25: Convertible Top Operation Button - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 3. Test the feature while outside of the vehicle, by To Unlatch The Trunk pressing the LOCK button on the RKE transmitter with Press the TRUNK button on the RKE transmitter two the ignition in the LOCK position, and the key removed.
Page 26: Programming Additional Transmitters
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE headlights and park lights will flash, the horn will pulse Battery Replacement on and off, and the Illuminated Entry system (if The recommended replacement battery is CR2032. equipped) will turn on. NOTE: •...
Page 27: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 General Information This device complies with part 15 of FCC rules and with RS-210 of Industry Canada. Operation is subject to the following conditions: 1. This device may not cause harmful interference. 2.
Page 28: Remote Starting System - If Equipped
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Hood closed 2. Closeness to a radio transmitter such as a radio station tower, airport transmitter, military base, and some mobile • Trunk closed or CB radios. • Hazard switch off REMOTE STARTING SYSTEM —...
Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • Remote Start Aborted — Hood Ajar WARNING! • Remote Start Aborted — Trunk Ajar • Do not start or run an engine in a closed garage or • Remote Start Aborted — Fuel Low confined area.
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The engine can be started two consecutive times (two To Exit Remote Start Mode Without Driving The 15 minute cycles) with the RKE transmitter. However, Vehicle the ignition switch must be cycled to the ON/RUN Press and release the REMOTE START button one time or position before you can repeat the start sequence for a allow the engine to run for the entire 15 minute cycle.
Page 31: Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 DOOR LOCKS If the door lock knob is down when you shut the door, the door will lock. Make sure the keys are not inside the Manual Door Locks vehicle before closing the door. To lock each door, push the door lock knob on each door trim panel downward.
Page 32: Power Door Locks
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks Auto Door Locks A door lock switch is located on the driver and passenger When enabled, your door locks will lock automatically door trim panel. Press this switch to lock or unlock the when the vehicle’s speed exceeds 15 mph (24 km/h).
Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 6. The vehicle speed is 0 mph (0 km/h). 3. Press the power door UNLOCK switch to unlock the doors. Auto Unlock Door On Exit Programming The Automatic Unlock Doors On Exit feature can be 4.
Page 34: Windows
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS The window controls will operate when the ignition switch is turned to the ON/RUN or ACC position, and Power Windows when the accessory delay feature is active. The window controls on the driver’s door trim panel operate the door windows and the rear quarter windows.
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Smart Glass Feature For vehicles not equipped with the Electronic Vehicle The door window will lower slightly if the window is Information Center (EVIC), the power window switches fully up when opening the door. The window will return will remain active for 45 seconds after the ignition switch to its full up position after closing the door.
Page 36 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To reactivate the window Smart Glass Feature, perform passenger door, press and release the window LOCK the following steps after vehicle power is restored. button (setting it in the down position). To enable the window control, press and release the window LOCK 1.
Page 37: Wind Buffeting
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Wind Buffeting The trunk release button on the dash Wind buffeting can be described as the perception of will be disabled if the vehicle is locked pressure on the ears or a helicopter-type sound in the by pressing the power door lock ears.
Page 38: Trunk Safety Warning
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE With the ignition switch in the ON/RUN position, the TRUNK SAFETY WARNING word “deck” will display in the odometer indicating the WARNING! trunk is open. The odometer display will reappear once the trunk is closed or if the trip button is pressed. Do not allow children to have access to the trunk, With the ignition switch in the LOCK position or with the either by climbing into the trunk from outside, or...
Page 39: Trunk Internal Emergency Release
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Trunk Internal Emergency Release OCCUPANT RESTRAINTS As a security measure, a Trunk Internal Emergency Release Some of the most important safety features in your lever is built into the trunk latching mechanism. In the vehicle are the restraint systems: event of an individual being locked inside the trunk, the •...
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Front seat belts incorporate pretensioners that may NOTE: The Advanced Front Airbags have a multistage enhance occupant protection by managing occupant inflator design. This allows the airbag to have different energy during an impact event rates of inflation based on the severity and type of collision.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Children that are not big enough to wear the vehicle seat 3. The driver and front passenger seats should be belt properly (see section on Child Restraints) should be moved back as far as practical to allow the Advanced secured in the rear seat in child restraints or belt- Front Airbags room to inflate.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • In an accident, you and your passengers can suffer • Relying on the airbags alone could lead to more much greater injuries if you are not properly severe injuries in a collision. The airbags work buckled up.
Page 43: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 of ejection and the risk of injury caused by striking the WARNING! (Continued) inside of the vehicle. Everyone in a motor vehicle should • It is dangerous to ride in a cargo area, inside or be belted at all times.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Two people should never be belted into a single seat belt. People belted together can crash into one another in an accident, hurting one another badly. Never use a lap/shoulder belt or a lap belt for more than one person, no matter what their size.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 3. When the belt is long enough to fit, insert the latch WARNING! plate into the buckle until you hear a “click.” • A belt that is buckled into the wrong buckle will not protect you properly.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your WARNING! (Continued) abdomen. To remove slack in the lap belt portion, pull up • A belt that is worn under your arm is dangerous. on the shoulder belt.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 6. To release the belt, push the red button on the buckle. WARNING! The belt will automatically retract to its stowed position. • A lap belt worn too high can increase the risk of If necessary, slide the latch plate down the webbing to allow the belt to retract fully.
Page 48: Lap/Shoulder Belt Untwisting Procedure
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Untwisting Procedure additional information refer to “Installing Child Re- Use the following procedure to untwist a twisted lap/ straints Using The Vehicle Seat Belt” under the “Child shoulder belt. Restraints” section. The chart below defines the type of feature for each seating position.
Page 49: Automatic Locking Retractor Mode (Alr) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 out only the amount of webbing necessary to comfort- How To Engage The Automatic Locking Mode ably wrap around the occupants mid-section. Slide the 1. Buckle the combination lap and shoulder belt. latch plate into the buckle until you hear a click.
Page 50: Energy Management Feature
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! • The belt and retractor assembly must be replaced • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Re- if the seat belt assembly Automatic Locking Re- tractor (ALR) feature or any other seat belt func- tractor (ALR) feature or any other seat belt func- tion is not working properly when checked ac-...
Page 51: Supplemental Active Head Restraints (Ahr)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 NOTE: These devices are not a substitute for proper seat How the Active Head Restraints (AHR) Work belt placement by the occupant. The seat belt still must be The Occupant Restraint Controller (ORC) determines worn snugly and positioned properly.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The Active Head Restraints (AHR) may or may not deploy in the event of a front or side impact. However if during a front impact, a secondary rear impact occurs, the AHR may deploy based on the sever- ity and type of the impact.
Page 53: Understanding The Features Of Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 1. Grasp the deployed AHR from the rear seat. CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 3 — Final Downward Movement To Engage Locking Mecha- nism 1 — Downward Movement 2 —...
Page 55: Enhanced Seat Belt Use Reminder System (Beltalert )
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 • For safety reasons, have the Active Head Restraints 4. The AHR front soft foam and trim half should lock into the back decorative plastic half. checked by a qualified specialist at an authorized dealer. Enhanced Seat Belt Use Reminder System (BeltAlert ) BeltAlert is a feature intended to remind the driver to...
Page 56: Beltalert Programming
BeltAlert Programming 3. Unbuckle and then re-buckle the driver’s seat belt at least three times within 10 seconds, ending with the seat NOTE: Chrysler Group LLC does not recommend de- belt buckled. activating BeltAlert . NOTE: Watch for the Seat Belt Reminder Light to turn...
Page 57: Seat Belts And Pregnant Women
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Seat Belts And Pregnant Women Seat Belt Extender We recommend that pregnant women use the seat belts If a seat belt is too short, even when fully extended, your throughout their pregnancy. Keeping the mother safe is authorized dealer can provide you with a seat belt the best way to keep the baby safe.
Page 58: Supplemental Restraint System (Srs) - Airbags
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Restraint System (SRS) - Airbags This vehicle has Advanced Front Airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Air- bag is mounted in the center of the steering wheel.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 The Advanced Front Airbags have a multistage inflator NOTE: • Airbag covers may not be obvious in the interior trim; design. This allows the airbag to have different rates of inflation that are based on the severity and type of but they will open during airbag deployment.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental Seat-Mounted Side Airbags (SAB) WARNING! • Front and Side Impact Sensors • No objects should be placed over or near the • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, airbag on the instrument panel, because any such and Seat Track Position Sensors objects could cause harm if the vehicle is in a...
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 WARNING! (Continued) • Do not mount any accessories to the knee bolster such as alarm lights, stereos, citizen band radios, etc. Supplemental Seat-Mounted Side Airbags (SAB) Supplemental Seat-Mounted Side Airbags may provide enhanced protection to help protect an occupant during a side impact.
Page 62: Airbag Deployment Sensors And Controls
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag Deployment Sensors And Controls WARNING! Occupant Restraint Controller (ORC) Do not use accessory seat covers or place objects The ORC is part of a Federally regulated safety system between you and the side airbags; the performance required for this vehicle.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 The Advanced Front Airbags will not deploy in all frontal The ORC monitors the readiness of the electronic parts of collisions, including some that may produce substantial the airbag system whenever the ignition switch is in the vehicle damage —...
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE It also includes diagnostics that will illuminate the instru- ORC detects a collision requiring the Advanced Front ment cluster Airbag Warning Light if a malfunction is Airbags, it signals the inflator units. A large quantity of noted that could affect the airbag system.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Supplemental Seat-Mounted Side Airbag (SAB) Front And Side Impact Sensors Inflator Units In front and side impacts, impact sensors can aid the The Supplemental Seat-Mounted Side Airbags (SAB) are ORC in determining appropriate response to impact designed to activate only in certain side collisions.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Unlock the doors automatically. However, if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor If A Deployment Occurs immediately. The front airbags are designed to deflate immediately •...
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Maintaining Your Airbag System WARNING! WARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, • Modifications to any part of the airbag system seat belt pretensioners, and the front seat belt retrac- could cause it to fail when you need it.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE with airbag system electrical components. While the WARNING! (Continued) airbag system is designed to be maintenance free, if any • Do not attempt to modify any part of your airbag of the following occurs, have an authorized dealer ser- system.
Page 69: Event Data Recorder (Edr)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Event Data Recorder (EDR) These data can help provide a better understanding of This vehicle is equipped with an event data recorder the circumstances in which crashes and injuries occur. (EDR). The main purpose of an EDR is to record, in NOTE: EDR data are recorded by your vehicle only if a certain crash or near crash-like situations, such as an air non-trivial crash situation occurs;...
Page 70: Child Restraints
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraints WARNING! Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the In a collision, an unrestrained child, even a tiny baby, United States and all Canadian provinces require that can become a projectile inside the vehicle.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Infants And Child Restraints WARNING! • Safety experts recommend that children ride Rearward-facing child seats must never be used in rearward-facing in the vehicle until they are at least the front seat of a vehicle with a front passenger one year old and weigh at least 20 lbs (9 kg).
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the shoulder belt contacts the face or neck, move the the vehicle’s seat belts properly. If the child cannot sit with knees bent over the vehicle’s cushion while the child closer to the center of the vehicle. Never allow a child’s back is against the seatback, then the child should child to put the shoulder belt under an arm or behind use a belt-positioning booster seat.
Page 73 • Buckle the child into the seat according to the child in a rear seat. restraint manufacturer’s directions. • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. Chrysler Group LLC also recommends that...
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH-compatible child restraints in adjacent rear seat- WARNING! ing positions, you can use the LATCH anchors or the vehicle’s seat belts. If your child restraints are not When your child restraint is not in use, secure it in LATCH-compatible, you can only install the child re- the vehicle with the seat belt or remove it from the straints using the vehicle’s seat belts.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 have tether straps, and you are urged to take advantage of all of the available attachments provided with your child restraint in any vehicle. NOTE: When using the LATCH attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing The LATCH-Compatible Child Restraint tether anchors are underneath access covers in the carpet System covering the back of the seat where you see this symbol. We urge you to carefully follow the directions of the Many, but not all restraint systems will be equipped with manufacturer when installing your child restraint.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 the access cover on the carpet covering the back of the Remind all children in the vehicle that the seat belts are seat and attach the tether strap hook to the anchor. Be not toys and should not be played with, and never leave careful to route the tether strap to provide the most direct your child unattended in the vehicle.
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ratcheting noise if you extract the entire belt from the and then allow the belt to retract into the retractor. As the retractor and then allow the belt to retract into the belt retracts, you will hear a ratcheting sound.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secure, try a different seating position. To attach a child restraint tether strap: 1. If lowered, raise the convertible top. NOTE: The convertible top must be in the UP position to access the tether anchor.
Page 80: Engine Break-In Recommendations
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Open the access cover (C) on the carpet covering the WARNING! back of the seat and attach the tether strap hook (D) to the anchor. An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child.
Page 81: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Drive moderately during the first 300 miles (500 km). SAFETY TIPS After the initial 60 miles (100 km), speeds up to 50 or Transporting Passengers 55 mph (80 or 90 km/h) are desirable. NEVER TRANSPORT PASSENGERS IN THE CARGO While cruising, brief full-throttle acceleration within the AREA.
Page 82: Exhaust Gas
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If it is necessary to sit in a parked vehicle with the engine WARNING! (Continued) running, adjust your heating or cooling controls to force • Be sure everyone in your vehicle is in a seat and outside air into the vehicle.
Page 83: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Safety Checks You Should Make Inside The Defroster Vehicle Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to Seat Belts feel the air directed against the windshield. See your Inspect the belt system periodically, checking for cuts, authorized dealer for service if your defroster is frays, and loose parts.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Check mounting of mats on a regular basis. Al- Pedals that cannot move freely can cause loss of ways properly reinstall and secure floor mats that vehicle control and increase the risk of serious per- have been removed for cleaning.
Page 85: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Periodic Safety Checks You Should Make Outside Door Latches The Vehicle Check for positive closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 87: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Emergency Bypass Mode (To Raise The Top Convertible Top Operation ....89 Only) ......107 ▫...
Page 88 86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Power Seats ......148 Uconnect™ Phone — If Equipped ... 111 ▫...
Page 89 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 ▫ Headlights With Wipers (Available With ▫ Intermittent Wiper System ....167 Automatic Headlights Only) ... . 160 ▫...
Page 90 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Garage Door Opener — If Equipped ..174 Cupholders ......184 ▫...
Page 91: Convertible Top Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 CONVERTIBLE TOP OPERATION WARNING! CAUTION! The convertible top does not provide the structural protection that a reinforced metal roof does and the Failure to follow these cautions may cause interior fabric top cannot be expected to prevent the ejection water damage, stains or mildew on the top material: of the occupants in a collision.
Page 92: Power Convertible Top Usage Precautions
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When operating the power convertible top, the trunk lid Spring-loaded flipper doors, which provide clearance for will pivot at the rear of the vehicle, swing open by the the linkage, close off notches in the quarter trim panels rear window, and then pivot backward.
Page 93 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 micro-switches verify that operations are complete CAUTION! (Continued) before allowing the next stage of lowering or raising • Always place items carefully into the trunk. operation. • Do not push items too far into the trunk, particu- •...
Page 94 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) CAUTION! (Continued) • Make sure the ambient temperature is above 0°F Failure to follow these cautions can cause damage to (-18°C). the convertible top components, trunk contents, and • Never attempt to lower a frozen convertible top. the vehicle interior.
Page 95 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 CAUTION! (Continued) WARNING! • Always use a normal ice scraper to remove snow or Failure to follow these warnings can result in injuries ice from the rear window. Use of a sharp object or that are serious or fatal to you, your passengers, and other tools could scratch the panels (hard top) or others around you:...
Page 96: Cargo Shield
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE seat the tabs at each end of the cargo shield in the V slots WARNING! (Continued) in the trunk liner. Doing so closes a switch that allows top • When using the power top switch on the instru- operation.
Page 97 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 forward onto the horizontal panel, then grasp both panels and lift them to the forward, upright position in the trunk. Cargo Shield Positioning The Cargo Shield For Cargo Storage To maximize the storage space in the trunk, the cargo shield can be stowed in the forward portion of the trunk.
Page 98: Power Convertible Top Controls
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Convertible Top Controls Lowering the Power Convertible Top The power top switch is located on the front of the center Using The Power Top Switch console. NOTE: The power top switch will operate when the There is also a power top button on the Remote Keyless ignition switch is turned to the ON or ACC position and Entry (RKE) transmitter for remotely lowering the power...
Page 99: Raising The Power Convertible Top
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Using The Remote Keyless Entry Transmitter Press and hold the switch in the Top Up position until the operation of raising the top NOTE: Steps 1 – 3 must be performed within five and latching it is complete, which is indicated seconds.
Page 100: Wind Stop - If Equipped
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manually Wind Stop — If Equipped Closing the power convertible top manually is a compli- The Wind Stop installs in the backseat area of the vehicle. cated and physically demanding procedure, and it re- The Wind Stop will not interfere with power top opera- quires a special tool to do so.
Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 NOTE: The frames must lie flat on each other in order to 4. Pivot the small frame (1) away from the large frame (2) snap them together. until the pivot lock (3) engages to lock the two frames in an L shape.
Page 102 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Unfold both stems at the rear of the large frame. 6. Align and insert the stems into the slot in each trim panel.
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 7. Align the pins at the front of the large frame with the Disengage the pivot lock (1) to fold the small frame flat hole in each trim panel. Slide the pins outward until fully onto the large frame.
Page 104: Power Convertible Top Operation And Warning Messages
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Convertible Top Operation And Warning Messages When the appropriate conditions exist, the PTCM displays various power convertible top operation and warning messages in the Electronic Vehicle Information Center (EVIC) – if equipped, or in the Odometer for vehicles not equipped with the EVIC.
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 EVIC Mes- EVIC Odometer Odometer Odometer Odometer Chime Condition Operator sage Message Message Message Message Message Action Display (< 5 mph Display (> 5 mph Display Required Time [8 km/ Time [8 km/ Time SECURE 9 sec.
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE EVIC Mes- EVIC Odometer Odometer Odometer Odometer Chime Condition Operator sage Message Message Message Message Message Action Display (< 5 mph Display (> 5 mph Display Required Time [8 km/ Time [8 km/ Time SPEED 9 sec.
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 EVIC Mes- EVIC Odometer Odometer Odometer Odometer Chime Condition Operator sage Message Message Message Message Message Action Display (< 5 mph Display (> 5 mph Display Required Time [8 km/ Time [8 km/ Time CONVERT- 6 sec.
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If so equipped. For vehicles not equipped with the EVIC. The PTCM will lockout the power convertible top system if the vehicle charging system is malfunction- ing, or the battery is run down, or the hydraulic pump is overheating. In addition, the system prohibits lower- ing the top when ambient temperature is at 0°F (-18°C) or lower and raising the top when ambient temperature is below -40°F (-40°C).
Page 109: Emergency Bypass Mode (To Raise The Top Only)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Emergency Bypass Mode (To Raise The Top CAUTION! (Continued) Only) • Using the Emergency Bypass Mode could poten- This procedure is only to be used to raise the top when tially damage the convertible top and should only the top cannot be returned to the UP (raised) position by be used to raise the power top to the UP (raised) pressing the POWER TOP switch or is in a position in...
Page 110: Mirrors
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Page 111: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Outside Mirrors Power Mirrors To receive maximum benefit, adjust the outside mirrors The power mirror switch is located on the driver’s door to center on the adjacent lane of traffic and a slight trim.
Page 112: Heated Mirrors - If Equipped
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After selecting a mirror, move the knob in the same Heated Mirrors — If Equipped direction you want the mirror to move. When finished, These mirrors are heated to melt frost or ice. This return the knob to the center “O”...
Page 113: Uconnect™ Phone - If Equipped
Bluetooth “Hands-Free Profile”, Ver- sion 0.96 or higher. See the Uconnect™ website for supported phones. For Uconnect™ customer support, visit the following websites: • www.chrysler.com/uconnect • www.dodge.com/uconnect Vanity Mirror Uconnect™ Phone — IF EQUIPPED • www.jeep.com/uconnect Uconnect™ Phone is a voice-activated, hands-free, in- •...
Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone allows you to transfer calls between WARNING! the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s Any voice commanded system should be used only microphone for private conversation.
Page 115: Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Voice Command Button Operation Actual button location may vary with the ra- Voice commands can be used to operate the Uconnect™ dio. The individual buttons are described in the Phone and to navigate through the Uconnect™ Phone “Operation”...
Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the compound form voice Cancel Command command “Phonebook New Entry”, or you can break At any prompt, after the beep, you can say “Cancel” and the compound form command into two voice com- you will be returned to the main menu.
Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 • When prompted, after the beep, say “Pair a Phone” phone to use if multiple mobile phones are in the and follow the audible prompts. vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the •...
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will confirm the phone number • The Uconnect™ system will confirm the name and and then dial. The number will appear in the display then dial the corresponding phone number, which of certain radios.
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • When prompted, enter the number designation (e.g., Phonebook Download – Automatic Phonebook “Home”, “Work”, “Mobile”, or “Other”). This will Transfer From Mobile Phone allow you to store multiple numbers for each phone- If equipped and specifically supported by your phone, book entry, if desired.
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries down- Phonebook Download — Single Entry loaded, there may be a short delay before the latest If equipped and supported by your phone, Uconnect™ downloaded names can be used. Until then, if avail- Phone also allows the user to download entries one at a able, the previously downloaded phonebook is avail- time from their phone via Bluetooth .
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 • You will then be asked for the name of the phonebook first disconnect or drop the Bluetooth connection to the Uconnect™ Phone, and then send the address entry that you wish to edit. book entry via Bluetooth .
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the name, the Uconnect™ Phone will Delete Uconnect™ Phonebook Entry ask you which designation you wish to delete: home, NOTE: Editing phonebook entries is recommended work, mobile, other, or all. Say the designation you when the vehicle is not in motion.
Page 123: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 • Note that only the phonebook in the current language • The Uconnect™ Phone will then prompt you as to the is deleted. number designation you wish to call. • Automatic downloaded phonebook entries cannot be •...
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE call, press and hold the button until you hear a by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is single beep, indicating that the incoming call was in progress.
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Conference Call on hold may not become active automatically. This is cell When two calls are in progress (one active and one on phone-dependent. To bring the call back from hold, press hold), press and hold the button until you hear a and hold the button until you hear a single beep.
Page 126: Uconnect™ Phone Features
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the ignition key is switched to OFF, a call can • After the “Ready” prompt and the following beep, say continue on the Uconnect™ Phone either until the call the name of the language you wish to switch to ends, or until the vehicle battery condition dictates English, Espanol, or Francais.
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 • If supported, this number may be programmable on If the phone is not reachable and the Uconnect™ Phone is operational, you may reach the emergency number as some systems. To do this, press the button and follows: say “Setup”, followed by “Emergency”.
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Towing Assistance Paging If you need towing assistance: To learn how to page, refer to “Working with Automated Systems”. Paging works properly except for pagers of • Press the button to begin. certain companies, which time out a little too soon to •...
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 When calling a number with your Uconnect™ Phone that The Uconnect™ Phone will then send the corresponding normally requires you to enter in a touch-tone sequence phone number associated with the phonebook entry, as on your mobile phone keypad, you can press the tones over the phone.
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning Confirmation Prompts ON/OFF Dialing Using The Mobile Phone Keypad Turning confirmation prompts off will stop the system You can dial a phone number with your mobile phone from confirming your choices (e.g., the Uconnect™ keypad and still use the Uconnect™...
Page 131: Advanced Phone Connectivity
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Mute/Un-Mute (Mute OFF) from your Uconnect™ Phone paired mobile phone to the When you mute the Uconnect™ Phone, you will still be Uconnect™ Phone or vice versa, press the button able to hear the conversation coming from the other and say “Transfer Call”.
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say “List Phones”. • The selected phone will be used for the next phone call. If the selected phone is not available, the • The Uconnect™ Phone will play the phone names of Uconnect™...
Page 133: Things You Should Know About Your Uconnect™ Phone
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Things You Should Know About Your Uconnect™ You can either press the Uconnect™ Phone button to Phone restore the factory setting or repeat the words and phrases when prompted by the Uconnect™ Phone. For Uconnect™...
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, Voice Command • For best performance, adjust the rearview mirror to • dry weather condition. provide at least ⁄ in (1 cm) gap between the overhead • Even though the system is designed for users speaking console (if equipped) and the mirror.
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • Numbers must be spoken in single digits. “800” must • fully closed windows, be spoken “eight-zero-zero” not “eight hundred”. • dry weather conditions, and • You can say “O” (letter “O”) for “0” (zero). •...
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages: Uconnect™ Phone can read or send new messages on You can send messages using Uconnect™ Phone. To send your phone. a new message: • Press the Read Messages: button. If you receive a new text message while your phone is •...
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 List of Preset Messages: 11. See You in 15 minutes 1. Yes 12. I am on my way 2. No 13. I’ll be late 3. Where are you? 14. Are you there yet? 4.
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn SMS Incoming Announcement ON/OFF Bluetooth Communication Link Turning the SMS Incoming Announcement OFF will stop Mobile phones have been found to lose connection to the the system from announcing the new incoming mes- Uconnect™...
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137...
Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139...
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 144: General Information
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information NOTE: Take care to speak into the Voice Interface This device complies with Part 15 of the FCC rules and System as calmly and normally as possible. The ability of RSS 210 of Industry Canada. Operation is subject to the the Voice Interface System to recognize user voice com- following conditions: mands may be negatively affected by rapid speaking or a...
Page 145: Commands
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 NOTE: If you do not say a command within a few When using this system, you should speak clearly and at seconds, the system will present you with a list of a normal speaking volume. options.
Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Memo” (to switch to the memo recorder) Changing the Volume • “System Setup” (to switch to system setup) 1. Start a dialogue by pressing the Voice Command button. Radio AM (or Radio Long Wave or Radio Medium Wave —...
Page 147 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 • “Previous Channel” (to select the previous channel) Radio FM To switch to the FM band, say “FM” or “Radio FM”. In • “List Channel” (to hear a list of available channels) this mode, you may say the following commands: •...
Page 148 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Memo − “Previous” (to play the previous memo) To switch to the voice recorder mode, say “Memo”. In − “Delete” (to delete a memo) this mode, you may say the following commands: • “Delete All” (to delete all memos) •...
Page 149: Voice Training
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 • “Language Spanish” session should be completed when the vehicle is parked, engine running, all windows closed, and the blower fan • “Tutorial” switched off. This procedure may be repeated with a new •...
Page 150: Power Seats
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed. •...
Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Adjusting The Seat Up Or Down WARNING! (Continued) The height of the seats can be adjusted up or down. Pull • Seats should be adjusted before fastening the upward or push downward on the rear of the seat switch, seatbelts and while the vehicle is parked.
Page 152: Heated Seats - If Equipped
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats — If Equipped 45 minutes of continuous operation. If LOW-level heating On some models, the front driver and passenger seats is selected, the system automatically turns the heater and may be equipped with heaters in both the seat cushions the indicator light OFF after a maximum of 45 minutes of and seatbacks.
Page 153: Recliner Adjustment
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 lever. To return the seatback to its normal upright posi- WARNING! (Continued) tion, lean forward and lift the lever. Release the lever • Do not place anything on the seat that insulates once the seatback is in the upright position. against heat, such as a blanket or cushion.
Page 154: Lumbar Support - If Equipped
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Page 155: Easy Entry System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Easy Entry System Pull the lever upward to move the seat and seatback The Easy Entry lever is located on upper seat belt anchor forward. cover. When returning the seat to its normal position, the memory feature restores the seat position and seatback recline position to their current settings.
Page 156: Adjusting Active Head Restraints
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting Active Head Restraints To raise the head restraint, pull upward on the head Active Head Restraints can reduce the risk of injury in restraint (on some models, you may need to press the the event of a rear impact.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 For comfort the Active Head Restraints can be tilted forward and backward. To tilt the head restraint closer to the back of your head, pull outward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head.
Page 158 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • In the event of deployment of an Active Head Re- WARNING! (Continued) straint, refer to “Occupant Restraints/Resetting Active • Do not place items over the top of the Active Head Head Restraints (AHR)” in “Things to Know Before Restraint, such as coats, seat covers or portable Starting Your Vehicle”...
Page 159: To Open And Close The Hood
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 TO OPEN AND CLOSE THE HOOD 2. Move to the outside of the vehicle and lift the second- Two latches must be released to open the hood. ary latch underneath the center front edge of the hood and raise the hood.
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Use the hood prop rod to secure the hood in the open CAUTION! position. Place the upper end of the prop rod in the hole on the underside of the hood. To prevent possible damage, do not slam the hood to close it.
Page 161: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 LIGHTS Headlights And Parking Lights Turn the end of the multifunction lever to the first detent Multifunction Lever for parking light operation. Turn the end of the lever to The multifunction lever on the left side of the steering the second detent for headlight operation.
Page 162: Lights-On Reminder
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lights-On Reminder Headlights With Wipers (Available With Automatic If the headlights or parking lights are on after the ignition Headlights Only) is turned to the LOCK position, a chime will sound to When this feature is active, the headlights will turn on alert the driver when the driver’s door is opened.
Page 163: Headlight Time Delay - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Headlight Time Delay — If Equipped The Headlight delay time is programmable on vehicles This feature is particularly useful when exiting your equipped with the Electronic Vehicle Information Center vehicle in an unlit area. It provides the safety of headlight (EVIC).
Page 164: Fog Lights - If Equipped
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the center portion of the lever upward to the last detent to turn on the interior lighting. Front Fog Light Control NOTE: The front fog lights will only operate with the headlights on low beam. Selecting high beam headlights Dimmer Control will turn off the front fog lights.
Page 165: Daytime Running Lights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Daytime Running Lights — If Equipped The high beam headlights will turn on as Daytime Running Lights (DRL) and operate at lower intensity whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is released and the shift lever is in any position except PARK.
Page 166: High/Low Beam Switch
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE High/Low Beam Switch in the multifunction lever. These lights are also controlled Push the multifunction lever away from you to switch automatically by the Illuminated Entry System. the headlights to high beam. Pull the multifunction lever toward you, to switch the headlights back to low beam.
Page 167: Battery Saver Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Battery Saver Feature To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open.
Page 168 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the end of the lever to the LO position for NOTE: The wipers will automatically return to the low-speed wiper operation, or to the HI position for “Park” position if you turn the ignition switch OFF while high-speed wiper operation.
Page 169: Intermittent Wiper System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Intermittent Wiper System Use the intermittent wiper system when weather condi- tions make a single wiping cycle with a variable pause between cycles desirable. Rotate the end of the wind- shield wiper/washer control lever to the first detent, and then turn the end of the lever to select the desired delay interval.
Page 170: Mist Feature
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with defroster before and during wind- shield washer use.
Page 171: Headlights With Wipers (Available With Auto Headlights Only)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Headlights With Wipers (Available With Auto Windshield Washers Headlights Only) To use the washer, pull the windshield wiper/washer When this feature is active, the headlights will turn on control lever toward you and hold it for as long as approximately 10 seconds after the wipers are turned on washer spray is desired.
Page 172: Tilt/Telescoping Steering Column
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN To unlock the steering column, push the lever down- This feature allows you to tilt the steering column ward. To tilt the steering column, move the steering upward or downward. It also allows you to lengthen or wheel upward or downward as desired.
Page 173: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
Page 174: To Activate
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE System can be reactivated by pushing the Electronic To Set A Desired Speed Speed Control ON/OFF button and resetting the desired Turn the Electronic Speed Control ON. When the vehicle vehicle set speed. has reached the desired speed, press the SET (-) button and release.
Page 175: To Resume Speed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 To Resume Speed decrease until the button is released. Release the button To resume a previously set speed, push the RES (+) when the desired speed is reached, and the new set speed button and release.
Page 176: Garage Door Opener - If Equipped
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On steep hills, a greater speed loss or gain may occur so The HomeLink buttons that are located in the headliner it may be preferable to drive without Electronic Speed or sun visor designate the three different HomeLink Control.
Page 177: Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Programming HomeLink WARNING! Before You Begin • Your motorized door or gate will open and close If you have not trained any of the HomeLink buttons, while you are training the universal transceiver. erase all channels before you begin training.
Page 178 176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After training a HomeLink channel, if the garage Place the handheld transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink button you wish to pro- door does not operate with HomeLink and the ga- gram while keeping the indicator light in view.
Page 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 This can usually be found where the hanging antenna 1. Firmly press and release the LEARN or TRAINING wire is attached to the garage door opener motor. It is button. The name and color of the button may vary by NOT the button normally used to open and close the manufacturer.
Page 180: Gate Operator/Canadian Programming
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gate Operator/Canadian Programming successfully accepted the frequency signal. The indica- Canadian radio frequency laws require transmitter sig- tor light will flash slowly and then rapidly when fully nals to time-out (or quit) after several seconds of trans- trained.
Page 181: Reprogramming A Single Homelink Button
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Reprogramming A Single HomeLink Button The HomeLink Universal Transceiver is disabled when To reprogram a channel that has been previously trained, the Vehicle Security Alarm is active. follow these steps: Troubleshooting Tips 1. Turn the ignition switch to the ON/RUN position. If you are having trouble programming HomeLink , here are some of the most common solutions: 2.
Page 182: General Information
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information ELECTRICAL POWER OUTLETS This device complies with FCC rules Part 15 and Industry There are two 12 Volt (13 Amp) electrical power outlets Canada RSS-210. Operation is subject to the following on this vehicle.
Page 183 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Instrument Panel Power Outlet Center Console The center console power outlet is powered directly from the battery (power available at all times). Items plugged into this power outlet may discharge the battery and/or prevent the engine from starting.
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. •...
Page 185: Cigar Lighter And Ash Receiver - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 CIGAR LIGHTER AND ASH RECEIVER — IF CAUTION! EQUIPPED • Many accessories that can be plugged in draw An optional ash receiver is available from your autho- rized dealer and will fit in the center console front power from the vehicle’s battery, even when not in cupholder.
Page 186: Cupholders
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Seat Cupholder The cupholder in the center console will accommodate either two large size cups or two 20 oz. (.5 L) bottles or cans. The one-piece insert can be removed easily for cleaning.
Page 187: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 STORAGE Glove Box Storage Compartment The glove box storage compartment is located on the right side of the instrument panel. To open the glove box, pull outward on the latch handle located on the front of the glove box.
Page 188: Console Features
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONSOLE FEATURES Storage The center console is located between the front driver and passenger seats. The center console armrest slides forward from design position to provide added user comfort. The center console can be used for storage and is also equipped with an electrical power outlet.
Page 189 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 (designed to hold various size coins). The console’s front opening lid allows for easy access to these compartments. NOTE: • A notch in the front of the console base allows for use of a cellular phone while it is plugged into the power outlet with the armrest latched down.
Page 190: Rear Window Features
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES CAUTION! Rear Window Defroster Failure to follow these cautions can cause damage to The rear window defroster button is located on the the heating elements: climate control (Mode) knob. Press this button to •...
Page 191: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Trip Functions ..... . 214 Instrument Panel Features ....192 ▫...
Page 192 190 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operation Instructions - (Disc Mode For CD Media Center 130 (Sales Code RES) ..243 And MP3/WMA Audio Play, DVD-Video) . . . 232 ▫ Operating Instructions — Radio Mode ..243 ▫...
Page 193 UNDERSTANDING YOUR INSTRUMENT PANEL 191 ▫ Uconnect™ Multimedia (Satellite Radio) — If Steering Wheel Audio Controls — Equipped ......264 If Equipped .
Page 194: Instrument Panel Features
192 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Outlet 6 — Radio 11 — Storage Compartment 2 — Side Window Demister Outlet 7 — Passenger Airbag 12 — Climate Control 3 — Instrument Cluster 8 — Glove Compartment 13 —...
Page 195: Instrument Cluster
UNDERSTANDING YOUR INSTRUMENT PANEL 193 INSTRUMENT CLUSTER...
Page 196: Instrument Cluster Descriptions
194 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to Floor and 1. Temperature Gauge the Fan control to High. This allows the heater core to act The temperature gauge shows engine coolant tempera- as a supplement to the radiator and aids in removing heat ture.
Page 197 UNDERSTANDING YOUR INSTRUMENT PANEL 195 5. Low Fuel Light If jump starting is required, refer to “Jump Starting When the fuel level drops to approximately 2.0 gal- Procedures” in “What To Do In Emergencies”. lons (7.6 Liters), the fuel symbol will light and a 7.
Page 198 196 UNDERSTANDING YOUR INSTRUMENT PANEL flash or remain on continuously. Refer to “Occupant 10. Engine Temperature Warning Light Restraints” in “Things To Know Before Starting Your This light warns of an overheated engine condi- Vehicle” for further information. tion. As temperatures rise and the gauge ap- proaches H, this indicator will illuminate and a 9.
Page 199 UNDERSTANDING YOUR INSTRUMENT PANEL 197 11. Brake Warning Light If brake failure is indicated, immediate repair is neces- This light monitors various brake functions, sary. including brake fluid level and parking brake WARNING! application. If the brake light turns on, it may indicate that the parking brake is applied, that Driving a vehicle with the brake light on is danger- the brake fluid level is low, or that there is a problem with...
Page 200 198 UNDERSTANDING YOUR INSTRUMENT PANEL off unless the parking brake is applied or a brake fault is NOTE: You must apply the brakes before shifting from detected. If the light does not illuminate, have the light PARK. inspected by an authorized dealer. 14.
Page 201 UNDERSTANDING YOUR INSTRUMENT PANEL 199 The two trip odometers show individual trip mileage. To TOP donE ..Convertible Top Up/Down Operation Is switch from odometer to trip odometers, press and Complete release the Trip Odometer button. To reset a trip odom- TOP nOT SECUrE .
Page 202 200 UNDERSTANDING YOUR INSTRUMENT PANEL LoW tirE will display in the odometer display area. If this occurs, When the appropriate condition exists, the odometer tighten the fuel filler cap properly and press the odom- display will toggle between LoW and TirE for three eter reset button to turn off the “gASCAP”...
Page 203 UNDERSTANDING YOUR INSTRUMENT PANEL 201 Unless reset, this message will continue to display each 4. For vehicles equipped with the Electronic Vehicle time you turn the ignition switch to the “ON” position. Information Center (EVIC), refer to “Electronic Vehicle To turn off the message temporarily, press and release the Information Center (EVIC)”.
Page 204 202 UNDERSTANDING YOUR INSTRUMENT PANEL To reset the trip odometer, first set the display to Trip 17. Electronic Throttle Control (ETC) Indicator Light Mode. Then push and hold the button (approximately This light informs you of a problem with the 2 seconds) until the display resets to 0 miles (kilometers).
Page 205 UNDERSTANDING YOUR INSTRUMENT PANEL 203 18. Position Light Indicator — If Equipped 21. Front Fog Light Indicator — If Equipped This indicator will illuminate when the park This indicator will illuminate when the front fog lights or headlights are turned on. lights are on.
Page 206 204 UNDERSTANDING YOUR INSTRUMENT PANEL the conventional brake system will continue to operate engine running. If the “ESC Activation/Malfunction In- normally provided that the BRAKE warning light is not dicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system.
Page 207 UNDERSTANDING YOUR INSTRUMENT PANEL 205 • The ESC system will make buzzing or clicking sounds Accordingly, when the low tire pressure telltale illumi- when it is active. This is normal; the sounds will stop nates, you should stop and check your tires as soon as when ESC becomes inactive following the maneuver possible, and inflate them to the proper pressure.
Page 208 206 UNDERSTANDING YOUR INSTRUMENT PANEL illuminated. This sequence will continue upon subse- CAUTION! quent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the sys- The TPMS has been optimized for the original tem may not be able to detect or signal low tire pressure equipment tires and wheels.
Page 209 UNDERSTANDING YOUR INSTRUMENT PANEL 207 the bulb does not come on when turning the key from WARNING! LOCK to ON/RUN, have the condition checked promptly. A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal Certain conditions such as a loose or missing gas cap, operating conditions.
Page 210: Mini-Trip Computer - If Equipped
208 UNDERSTANDING YOUR INSTRUMENT PANEL 29. Electronic Vehicle Information Center (EVIC) CAUTION! Display — If Equipped This display shows the EVIC messages when the appro- Continuous driving with the Transmission Tempera- priate conditions exist. Refer to “Electronic Vehicle Infor- ture Warning Light illuminated will eventually cause mation Center (EVIC)”...
Page 211: Control Buttons
UNDERSTANDING YOUR INSTRUMENT PANEL 209 Control Buttons RESET Button To reset the display shown, turn the ignition switch to the ON position, then press and hold the RESET button located on the steering wheel. The following displays can be reset or changed: •...
Page 212: Electronic Vehicle Information Center (Evic) - If Equipped
210 UNDERSTANDING YOUR INSTRUMENT PANEL Trip B Shows the total distance traveled for Trip B since the last reset. ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) – IF EQUIPPED The Electronic Vehicle Information Center (EVIC) fea- tures a driver-interactive display that is located in the instrument cluster.
Page 213 UNDERSTANDING YOUR INSTRUMENT PANEL 211 • Compass heading display (N, S, E, W, NE, NW, SE, • Outside temperature display (°F or °C) • Trip computer functions • Audio mode displays – 12 preset Radio Stations or CD Title and Track number when playing •...
Page 214: Electronic Vehicle Information Center (Evic) Displays
212 UNDERSTANDING YOUR INSTRUMENT PANEL Press and release the DOWN button to advance Electronic Vehicle Information Center (EVIC) the display through the various Trip Functions Displays or Personal Settings. When the appropriate conditions exist, the EVIC displays the following messages: DOWN Button •...
Page 215: Oil Change Required - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 213 • Left/Right Door Ajar (one or more, with a single • Secure Cargo Shield (with a single chime) chime if speed is above 1 mph) • Speed Too High (with a single chime) • Door(s) Ajar (with a single chime if vehicle is in •...
Page 216: Trip Functions
214 UNDERSTANDING YOUR INSTRUMENT PANEL next scheduled oil change interval. The engine oil change NOTE: If the indicator message illuminates when you indicator system is duty cycle based, which means the start the vehicle, the oil change indicator system did not engine oil change interval may fluctuate dependent upon reset.
Page 217 UNDERSTANDING YOUR INSTRUMENT PANEL 215 The Trip Functions mode displays the following informa- determined by a weighted average of the instantaneous tion: and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the SELECT •...
Page 218: Compass Display
216 UNDERSTANDING YOUR INSTRUMENT PANEL • Elapsed Time Compass Display Shows the total elapsed time of travel since the last reset. The compass heading indicates the direction Elapsed time will increment when the ignition switch is the vehicle is facing. Press and release the in the ON or START position.
Page 219 UNDERSTANDING YOUR INSTRUMENT PANEL 217 Automatic Compass Calibration 1. Start the engine. Leave the shift lever in PARK in order This compass is self-calibrating, which eliminates the to enter the EVIC Programming Menus. need to calibrate the compass manually. When the ve- 2.
Page 220 218 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Variance Compass Variance is the difference between magnetic North and Geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings.
Page 221: Personal Settings (Customer-Programmable Features)
UNDERSTANDING YOUR INSTRUMENT PANEL 219 3. Press and release the DOWN button until “Compass Press and release the MENU button until “Personal Variance” and the current Variance Value displays in the Settings” displays in the EVIC. EVIC. Press and release the DOWN button to display the 4.
Page 222 220 UNDERSTANDING YOUR INSTRUMENT PANEL RKE Unlock Flash Lamps with LOCK When Driver Door 1st Press is selected, only the driver’s When ON is selected, the front and rear turn signals will door will unlock on the first press of the Remote Keyless flash when the doors are locked or unlocked with the Entry (RKE) transmitter UNLOCK button.
Page 223: Starting And Operating
UNDERSTANDING YOUR INSTRUMENT PANEL 221 off if they were turned on by this feature. To make your Illumin. Approach selection, press the SELECT button until ON or OFF When this feature is selected, the headlights will activate appears. and remain on for up to 90 seconds when the doors are unlocked with the remote keyless entry transmitter.
Page 224: Setting The Analog Clock
222 UNDERSTANDING YOUR INSTRUMENT PANEL Display Units In SETTING THE ANALOG CLOCK The EVIC and odometer can be changed between English and Metric units of measure. To make your selection, press and release the SELECT button until “ENGLISH” or “METRIC” appears. Calibrate Compass Refer to “Compass Display”...
Page 225: Media Center 230 (Req) - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer (Mp3/Wma Aux Jack)
UNDERSTANDING YOUR INSTRUMENT PANEL 223 MEDIA CENTER 230 (REQ) — AM/FM STEREO Operating Instructions - Radio Mode RADIO AND 6–DISC CD/DVD CHANGER NOTE: The ignition switch must be in the ON or ACC (MP3/WMA AUX JACK) position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate.
Page 226 224 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Voice Command Button Uconnect™ Phone — If Press and release the SEEK buttons to search for the next Equipped listenable station in AM/FM mode. Press the right switch Press this button to operate the Uconnect™ Phone feature to seek up and the left switch to seek down.
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 225 If your vehicle is not equipped with or this feature is not 4. Adjust the minutes using the right side TUNE/ available on your vehicle, a “Not Equipped With SCROLL control knob. Press the TUNE/SCROLL control Uconnect Phone”...
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL TUNE Control SCROLL control knob to the right or left to adjust the Turn the rotary TUNE/SCROLL control knob clockwise sound level from the right or left side speakers. to increase or counterclockwise to decrease the frequency. Push the rotary TUNE/SCROLL control knob a fifth time Setting the Tone, Balance, and Fade and FADE will display.
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 227 Toggle the MUSIC TYPE button to select the following 16-Digit Program Type format types: Character Display 16-Digit Personality Persnlty Program Type Character Display Public Public No program type Rhythm and Blues R & B None or undefined Religious Music Rel Musc...
Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter - When the disc is in DVD Menu mode, By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency selecting DVD Enter will allow you to play the current station with the same selected Music Type name.
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 229 • Angle – Repeatedly pressing SELECT will change • Set Home Clock - Pressing the SELECT button allows the viewing angle if supported by the DVD disc (if you to set the clock. Turn the TUNE/SCROLL control equipped).
Page 232 230 UNDERSTANDING YOUR INSTRUMENT PANEL Audio Language — If Equipped Audio DRC — If Equipped Selecting this item allows you to choose a default audio Selecting this item allows you to limit maximum audio language (effective only if the language is supported by dynamic range.
Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 231 a disc is loaded, changes will not be effective. Also, the both AM and FM. This allows a total of 12 AM, 12 FM, defaults are effective only if the disc supports the and 12 Satellite (if equipped) stations to be stored into customer-preferred settings.
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - (DISC MODE for CD and NOTE: The ignition switch must be in the ON or ACC MP3/WMA Audio Play, DVD-VIDEO) position to operate the radio. The radio DVD player and many DVD discs are coded by LOAD Button —...
Page 235 UNDERSTANDING YOUR INSTRUMENT PANEL 233 Eject Button — Ejecting Compact Disc(s) SCAN Button (CD MODE) Press the EJECT button and the pushbutton Press the SCAN button to scan through each track on the with the corresponding number (1-6) where the CD currently playing.
Page 236: Notes On Playing Mp3/Wma Files
234 UNDERSTANDING YOUR INSTRUMENT PANEL Notes On Playing MP3/WMA Files The radio uses the following limits for file systems: The radio can play MP3/WMA files; however, acceptable • Maximum number of directory levels: 8 MP3/WMA file recording media and formats are limited. •...
Page 237 UNDERSTANDING YOUR INSTRUMENT PANEL 235 If a disc contains multi-formats, such as CD audio and MPEG Sampling Bit Rate (kbps) MP3/WMA tracks, the radio will only play the MP3/ Specification Frequency (kHz) WMA tracks on that disc. 320, 256, 224, MPEG-1 Audio 192, 160, 128, Supported MP3/WMA File Formats...
Page 238: List Button (Disc Mode For Mp3/Wma Play)
236 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3/WMA Files LIST Button (DISC Mode for MP3/WMA Play) When a medium containing MP3/WMA data is loaded, Pressing the LIST button will bring up a list of all folders the radio checks all files on the medium. If the medium on the disc.
Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 237 Press and hold the INFO button again for three seconds SCAN Button (Auxiliary Mode) to return to elapsed time display. No function. Operation Instructions - Auxiliary Mode EJECT Button (Auxiliary Mode) The auxiliary (AUX) jack is an audio input jack which No function.
Page 240: Uconnect™ Multimedia (Satellite Radio) - If Equipped
238 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Voice Command System Macrovision (If Equipped) This product incorporates copyright protection technol- For the radio, Refer to “Voice Command” in the ogy that is protected by U.S. patents and other intellec- Uconnect™ User Manual located on the DVD for further tual property rights.
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 239 sports, news, entertainment, and programming for chil- 1. The Electronic Serial Number/Sirius Identification dren, directly from its satellites and broadcasting studios. Number (ESN/SID). NOTE: Sirius service is not available in Hawaii and has 2. Your Vehicle Identification Number. limited coverage in Alaska.
Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL • Placing objects over or too close to the antenna can Satellite Antenna To ensure optimum reception, do not place items on the cause signal blockage. roof around the rooftop antenna location. Metal objects Operating Instructions - Uconnect™ Multimedia placed within the line of sight of the antenna will cause (Satellite) Mode decreased performance.
Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 241 SCAN Button TUNE Control (Rotary) Pressing the SCAN button causes the tuner to search for Turn the rotary TUNE/SCROLL control knob clockwise the next channel, pausing for eight seconds before con- to increase or counterclockwise to decrease the channel. tinuing to the next.
Page 244: Media Center 730N/430/430N
242 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button the SET button twice and SET 2 will show in the display Pressing the SETUP button allows you to select the window. Each button can be set for SET 1 and SET 2. This following items: allows a total of 12 Satellite channels to be stored into pushbutton memory.
Page 245: If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 243 Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” in the Uconnect™ User Manual located on the DVD for further details. Operating Instructions (Uconnect™ Phone) — If Equipped Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
Page 246 244 UNDERSTANDING YOUR INSTRUMENT PANEL Power Switch/Volume Control (Rotary) TIME Button Push the ON/VOLUME control knob to turn on the Press the TIME button to alternate display of the time radio. Push the ON/VOLUME control knob a second and radio frequency. time to turn off the radio.
Page 247 UNDERSTANDING YOUR INSTRUMENT PANEL 245 RW/FF Push the rotary TUNE/SCROLL control knob a third Pressing the RW (Rewind) or FF (Fast Forward) buttons time and TREBLE will display. Turn the TUNE/SCROLL causes the tuner to search for the next frequency in the control knob to the right or left to increase or decrease the direction of the arrows.
Page 248: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
246 UNDERSTANDING YOUR INSTRUMENT PANEL SET/RND Button — To Set the Pushbutton Every time a preset button is used, a corresponding Memory button number will display. When you are receiving a station that you wish to Buttons 1 - 6 commit to pushbutton memory, press the SET/RND These buttons tune the radio to the stations that you button.
Page 249 UNDERSTANDING YOUR INSTRUMENT PANEL 247 discs (CD-RW), compact discs with MP3 tracks and CAUTION! multisession compact discs with CD and MP3 tracks. • This CD player will accept 4-3/4 in (12 cm) discs Inserting Compact Disc(s) only. The use of other sized discs may damage the Gently insert one CD into the CD player with the CD CD player mechanism.
Page 250 248 UNDERSTANDING YOUR INSTRUMENT PANEL If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold the FF (Fast Forward) button and the CD the radio will reinsert the CD but will not play it.
Page 251: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 249 • Maximum number of files: 255 Notes on Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 • Maximum number of folders. (The radio display of file file recording media and formats are limited. When names and folder names is limited.
Page 252 250 UNDERSTANDING YOUR INSTRUMENT PANEL Discs created with an option such as keep disc open after MPEG Sampling Bit Rate (kbps) writing are most likely multisession discs. The use of Specification Frequency (kHz) multisession for CD audio or MP3 playback may result in 320, 256, 224, longer disc loading times.
Page 253: Operation Instructions - Auxiliary Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 251 Playback of MP3 Files Operation Instructions - Auxiliary Mode When a medium containing MP3 data is loaded, the The auxiliary (AUX) jack is an audio input jack, which radio checks all files on the medium. If the medium allows the user to plug in a portable device, such as an contains a lot of folders or files, the radio will take more MP3 player, or cassette player, and utilize the vehicle’s...
Page 254: Media Center 130 With Satellite Radio (Sales Code Res+Rsc)
252 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 130 WITH SATELLITE RADIO Operating Instructions — Radio Mode (SALES CODE RES+RSC) NOTE: The ignition switch must be in the ON or ACC NOTE: The radio sales code is located on the lower right position to operate the radio.
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 253 SEEK Buttons If your vehicle is not equipped with or this feature is not Press and release the SEEK buttons to search for the next available on your vehicle, a “Not Equipped With listenable station in AM/FM mode. Press the right switch Uconnect Phone”...
Page 256 254 UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure starting at Step 2. For vehicles not equipped with satellite radio, press the SETUP button and then follow the above 1. Press and hold the TIME button until the hours blink. procedure, starting at Step 2. 2.
Page 257 UNDERSTANDING YOUR INSTRUMENT PANEL 255 Setting the Tone, Balance, and Fade Push the rotary TUNE/SCROLL control knob a fifth time Push the rotary TUNE/SCROLL control knob and BASS and FADE will display. Turn the TUNE/SCROLL control will display. Turn the TUNE/SCROLL control knob to knob to the left or right to adjust the sound level between the right or left to increase or decrease the bass tones.
Page 258 256 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button to select the following 16-Digit Program Type format types: Character Display 16-Digit Personality Persnlty Program Type Character Display Public Public No program type Rhythm and Blues R & B None or undefined Religious Music Rel Musc...
Page 259 UNDERSTANDING YOUR INSTRUMENT PANEL 257 By pressing the SEEK button when the Music Type icon the minutes using the right side TUNE/SCROLL is displayed, the radio will be tuned to the next frequency control knob. Press the TUNE/SCROLL control knob station with the same selected Music Type name.
Page 260: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
258 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by Operation Instructions — CD MODE for CD and repeating the above procedure with this exception: Press MP3 Audio Play the SET/RND button twice and SET 2 will show in the NOTE: display window.
Page 261 UNDERSTANDING YOUR INSTRUMENT PANEL 259 If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD ON, the unit will switch from radio to CD mode and Press the EJECT button to eject the CD. begin to play when you insert the disc.
Page 262: Notes On Playing Mp3 Files
260 UNDERSTANDING YOUR INSTRUMENT PANEL the current selection. Pressing and holding the SEEK SET/RND Button (Random Play Button) button will allow faster scrolling through the tracks in Press this button while the CD is playing to activate CD and MP3 modes. Random Play.
Page 263 UNDERSTANDING YOUR INSTRUMENT PANEL 261 Supported Medium Formats (File Systems) exceeding 20 folders will result in this display. With The medium formats supported by the radio are ISO 9660 200 files, exceeding 50 folders will result in this Level 1 and Level 2 and includes the Joliet extension. display.) When reading discs recorded using formats other than •...
Page 264 262 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats MPEG Sampling Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- Specification Frequency (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 160, 128, 144, extension may cause playback problems.
Page 265: List Button (Cd Mode For Mp3 Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 263 Loading times for playback of MP3 files may be affected begin playing the files contained in that folder (or the by the following: next folder in sequence if the selection does not contain playable files). •...
Page 266: Uconnect™ Multimedia (Satellite Radio) - If Equipped
264 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - Auxiliary Mode Uconnect™ Multimedia (Satellite Radio) — If The auxiliary (AUX) jack is an audio input jack which Equipped allows the user to plug in a portable device such as an Satellite radio uses direct satellite-to-receiver broadcast- MP3 player or cassette player and utilize the vehicle’s ing technology to provide clear digital sound, coast to audio system to amplify the source and play through the...
Page 267 UNDERSTANDING YOUR INSTRUMENT PANEL 265 information, call the toll-free number 888-539-7474, Sirius ID number will display. The Sirius ID number or visit the Sirius web site at www.sirius.com, or at display will time out in two minutes. Press any button on www.siriuscanada.ca for Canadian residents.
Page 268 266 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
Page 269 UNDERSTANDING YOUR INSTRUMENT PANEL 267 additional three seconds will make the radio display the Toggle the MUSIC TYPE button again to select the music Song Title all of the time (press and hold again to return type. to normal display). By pressing the SEEK button when the Music Type RW/FF function is active, the radio will be tuned to the next...
Page 270: Ipod /Usb/Mp3 Control - If Equipped
268 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button – To Set the Pushbutton Memory Every time a preset button is used, a corresponding When you are receiving a channel that you wish to button number will display. commit to pushbutton memory, press the SET button. Buttons 1 - 6 The symbol SET 1 will now show in the display window.
Page 271: Connecting The Ipod Or External Usb Device
UNDERSTANDING YOUR INSTRUMENT PANEL 269 This feature allows an iPod or external USB device to be Connecting The iPod or External USB Device plugged into the USB port, located in the center of the Use the connection cable to connect an iPod or external instrument panel below the climate controls.
Page 272: Using This Feature
270 UNDERSTANDING YOUR INSTRUMENT PANEL • The audio device can be controlled using the radio Once the audio device is connected and synchronized to the vehicle’s iPod /USB/MP3 control system (iPod or buttons to Play, Browse, and List the iPod contents. external USB device may take a few minutes to connect), •...
Page 273: Play Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 271 • Jump backward in the current track by pressing and Play Mode When switched to iPod /USB/MP3 control mode, the holding the << RW button. Holding the << RW iPod or external USB device automatically starts Play button long enough will jump to the beginning of mode.
Page 274: List Or Browse Mode
272 UNDERSTANDING YOUR INSTRUMENT PANEL to the next screen of data for that track. Once all device, or press VR button and say Shuffle ON or screens have been viewed, the last INFO button press Shuffle Off . If the RND icon is showing on the radio will go back to the play mode screen on the radio.
Page 275 UNDERSTANDING YOUR INSTRUMENT PANEL 273 • Preset 6 – Podcasts fast will scroll through the list faster. During fast scroll, a slight delay in updating the information on • Pressing a PRESET button will display the current the radio display may be noticeable. list on the top line and the first item in that list on •...
Page 276: Bluetooth Streaming Audio (Btsa)
274 UNDERSTANDING YOUR INSTRUMENT PANEL • MUSIC TYPE button: The MUSIC TYPE button is WARNING! another shortcut button to the genre listing on your audio device. Do not plug in or remove the iPod or external USB device while driving. Failure to follow this warning CAUTION! could result in an accident.
Page 277: Steering Wheel Audio Controls - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 275 phone system. Seven devices can be paired to Uconnect™ Browse phone system, but just one can be selected and played. Browsing is not available on a BTSA device. Only the current song that is playing will display info. Selecting different Audio Device STEERING WHEEL AUDIO CONTROLS —...
Page 278: Radio Operation
276 UNDERSTANDING YOUR INSTRUMENT PANEL The remote sound system controls are located on the rear Radio Operation surface of the steering wheel, at the three and nine Pressing the top of the switch will SEEK up for the next o’clock positions. listenable station, and pressing the bottom of the switch will SEEK down for the next listenable station.
Page 279: Cd/Dvd Disc Maintenance
UNDERSTANDING YOUR INSTRUMENT PANEL 277 CD/DVD DISC MAINTENANCE NOTE: If you experience difficulty in playing a particu- To keep a CD/DVD in good condition, take the following lar disc, it may be damaged (i.e., scratched, reflective precautions: coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding.
Page 280: Climate Controls
278 UNDERSTANDING YOUR INSTRUMENT PANEL CLIMATE CONTROLS The Manual Temperature Controls consist of a series of The Air Conditioning and Heating System is designed to outer rotary dials and inner push knobs. make you comfortable in all types of weather. Blower Control Manual Heating and Air Conditioning Rotate this control to regulate the...
Page 281 UNDERSTANDING YOUR INSTRUMENT PANEL 279 Temperature Control Mode Control (Air Direction) Rotate this control to regulate the tem- Rotate this control to choose from sev- perature of the air inside the passenger eral patterns of air distribution. You compartment. Rotating the dial left can select either a primary mode as into the blue area of the scale indicates identified by the symbols on the con-...
Page 282 280 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: For all settings except full cold or full hot, there Defrost is a difference in temperature between the upper and Air is directed through the windshield and side lower outlets. The warmer air flows to the floor outlets. window demist outlets.
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 • Recirculated air is not allowed in Floor, Mix or Defrost the LED in the control button to illuminate. After ten minutes, the system will return to normal mode function modes. If the Recirculation button is depressed while and the LED will turn off.
Page 284: Automatic Temperature Control (Atc) - If Equipped
282 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The air conditioning compressor will not engage Automatic Temperature Control (ATC) — If until the engine has been running for about 10 seconds. Equipped • MAX A/C For maximum cooling use the A/C and recirculation buttons at the same time.
Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 283 Operation of the system is quite simple. the “O” (OFF) position on the blower control stops the system completely and closes the outside air intake. 1. Turn the Mode Control knob (on the right) and the Blower Control knob (on the left) to AUTO.
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL the radiator and through the condenser. Fabric front Manual Operation fascia protectors may reduce airflow to the condenser, This system offers a full complement of manual override reducing air conditioning performance. features, which consist of Blower Preferred Automatic, Mode Preferred Automatic, or Blower and Mode Pre- •...
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285...
Page 288 286 UNDERSTANDING YOUR INSTRUMENT PANEL • Floor The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets.
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 • Air Conditioner Control the LED in the control button to illuminate. After ten Press this button to turn on the air minutes, the system will return to normal AUTO mode conditioning during manual operation function and the LED will turn off.
Page 290: Operating Tips
288 UNDERSTANDING YOUR INSTRUMENT PANEL Recirculation to be selected while in floor, defrost, or Operating Tips Mix mode. Attempting to use the recirculation while in NOTE: Refer to the chart at the end of this section for these modes will cause the LED in the control button suggested control settings for various weather condi- to blink and then turn off.
Page 291 UNDERSTANDING YOUR INSTRUMENT PANEL 289 Winter Operation provide sufficient heating. If side window fogging be- Use of the air Recirculation Mode during winter months comes a problem, increase blower speed. Vehicle win- is not recommended because it may cause window dows tend to fog on the inside in mild but rainy or humid fogging.
Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL Outside Air Intake A/C Air Filter — If Equipped Make sure the air intake, located directly in front of the The A/C Filter prevents most dust and pollen from windshield, is free of obstructions such as leaves. Leaves entering the cabin.
Page 293 UNDERSTANDING YOUR INSTRUMENT PANEL 291 Control Setting Suggestions for Various Weather Conditions...
Page 295: Starting And Operating
STARTING AND OPERATING CONTENTS Starting Procedures ....298 Automatic Transmission ....301 ▫...
Page 296 294 STARTING AND OPERATING AutoStick — If Equipped ....308 Electronic Brake Control System ... 319 ▫...
Page 297 STARTING AND OPERATING 295 Tires — General Information ... . . 337 Tire Chains ......346 ▫...
Page 298 296 STARTING AND OPERATING ▫ Fuel System Cautions ....361 ▫ Fuel Filler Cap (Gas Cap) ....366 ▫...
Page 299 STARTING AND OPERATING 297 ▫ Trailer And Tongue Weight ... . . 375 Recreational Towing (Behind Motorhome, Etc.) ....381 ▫...
Page 300: Starting Procedures
298 STARTING AND OPERATING STARTING PROCEDURES NOTE: The ignition switch must be in the ON position, Before starting your vehicle, adjust your seat, adjust the and you must press the brake pedal before shifting out of inside and outside mirrors, fasten your seat belt, and if PARK.
Page 301: Extreme Cold Weather (Below -20°F Or 29°C)
STARTING AND OPERATING 299 to start, the starter will disengage automatically in 10 sec- WARNING! (Continued) onds. If this occurs, turn the ignition switch to the LOCK • Do not attempt to push or tow your vehicle to get position, wait 10 to 15 seconds, then repeat the “Normal it started.
Page 302: After Starting
300 STARTING AND OPERATING the way to the floor and hold it there while cranking the With Tip Start engine. This should clear any excess fuel in case the If the engine fails to start after you have followed the engine is flooded.
Page 303: Engine Block Heater - If Equipped
STARTING AND OPERATING 301 ENGINE BLOCK HEATER — IF EQUIPPED AUTOMATIC TRANSMISSION The engine block heater warms the engine, and permits CAUTION! quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a Damage to the transmission may occur if the follow- grounded, three-wire extension cord.
Page 304 302 STARTING AND OPERATING WARNING! WARNING! (Continued) • Unintended movement of a vehicle could injure • It is dangerous to move the shift lever out of PARK those in and near the vehicle. As with all vehicles, or NEUTRAL if the engine speed is higher than you should never exit a vehicle while the engine is idle speed.
Page 305: Automatic Transmission Ignition Interlock Systems
STARTING AND OPERATING 303 Automatic Transmission Ignition Interlock NOTE: If a malfunction occurs, the system will trap the Systems key in the ignition switch lock cylinder to warn you that These systems prevent the key fob from being removed this safety feature is inoperable. The engine can be started unless the shift lever is in PARK.
Page 306: Four-Speed/Six-Speed Automatic Transmission
304 STARTING AND OPERATING Four-Speed/Six-Speed Automatic Transmission Gear Ranges The electronically controlled transmission provides a PARK precise shift schedule. The transmission electronics are This range supplements the parking brake by locking the self-calibrating; therefore, the first few shifts on a new transmission.
Page 307 STARTING AND OPERATING 305 REVERSE WARNING! This range is for moving the vehicle backward. Use only • Never use the PARK position as a substitute for after the vehicle has come to a complete stop. the parking brake. Always apply the parking NEUTRAL brake fully when parked to guard against vehicle This range is used when vehicle is standing for pro-...
Page 308 306 STARTING AND OPERATING DRIVE – Six-Speed Transmission under heavy loading conditions, (i.e., in hilly terrain, This range should be used for most city and highway traveling into strong headwinds, or while towing heavy driving. It provides the smoothest upshifts, downshifts, trailers).
Page 309 STARTING AND OPERATING 307 LOW — Four-Speed Transmission the forward gear selected. PARK, REVERSE, and NEU- TRAL will continue to operate. The Reset feature allows This range should be used for engine braking when the vehicle to be driven to a dealer for service without descending very steep grades.
Page 310: Autostick - If Equipped
308 STARTING AND OPERATING If the transmission cannot be reset, dealer service is triggers a downshift and to the right (+) an upshift. The required. gear position will display in the instrument cluster on the transmission range indicator. AUTOSTICK — IF EQUIPPED NOTE: In AutoStick mode, the transmission will only AutoStick is a driver-interactive feature providing...
Page 311: Driving On Slippery Surfaces
STARTING AND OPERATING 309 • Starting out in second gear is helpful in snowy or icy • If the system detects powertrain overheating, the conditions. To select second gear after the vehicle is transmission will revert to the automatic shift mode brought to a stop, tap the shift lever to the right (+) and remain in that mode until the powertrain cools off.
Page 312: Traction
310 STARTING AND OPERATING 2. Slow down if the road has standing water or puddles. WARNING! 3. Replace the tires when tread wear indicators first Rapid acceleration on slippery surfaces is dangerous. become visible. Unequal traction can cause sudden pulling of the 4.
Page 313: Flowing/Rising Water
STARTING AND OPERATING 311 Flowing/Rising Water CAUTION! • Always check the depth of the standing water WARNING! before driving through it. Never drive through Do not drive on or across a road or path where water standing water that is deeper than the bottom of is flowing and/or rising (as in storm run-off).
Page 314 312 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Driving through standing water may cause dam- • Driving through standing water limits your vehi- age to your vehicle’s drivetrain components. Al- cle’s traction capabilities. Do not exceed 5 mph ways inspect your vehicle’s fluids (i.e., engine oil, (8 km/h) when driving through standing water.
Page 315: Power Steering
STARTING AND OPERATING 313 POWER STEERING system. This noise should be considered normal, and it The standard power steering system will give you good does not in any way damage the steering system. vehicle response and increased ease of maneuverability WARNING! in tight spaces.
Page 316: Power Steering Fluid Check
314 STARTING AND OPERATING Power Steering Fluid Check WARNING! Checking the power steering fluid level at a defined service interval is not required. The fluid should only be Fluid level should be checked on a level surface and checked if a leak is suspected, abnormal noises are with the engine off to prevent injury from moving apparent, and/or the system is not functioning as antici- parts and to ensure accurate fluid level reading.
Page 317 STARTING AND OPERATING 315 The parking brake lever is located in the center console. When the parking brake is applied with the ignition To apply the parking brake, pull the lever up as firmly as switch ON, the “Brake Warning Light” in the instrument possible.
Page 318 316 STARTING AND OPERATING make it difficult to move the shift lever out of PARK. The WARNING! (Continued) parking brake should always be applied whenever the • Be sure the parking brake is fully disengaged driver is not in the vehicle. before driving;...
Page 319: Anti-Lock Brake System (Abs)
STARTING AND OPERATING 317 ANTI-LOCK BRAKE SYSTEM (ABS) WARNING! (Continued) The Anti-Lock Brake System (ABS) provides increased • The ABS cannot prevent collisions, including vehicle stability and brake performance under most those resulting from excessive speed in turns, braking conditions. The system operates with a separate following another vehicle too closely, or hydro- computer to modulate the hydraulic pressure to prevent planing.
Page 320 318 STARTING AND OPERATING service is required. However, the conventional brake properly. This self check occurs each time the vehicle is system will continue to operate normally if the “Brake started and accelerated past 7 mph (11 km/h). Warning Light” is not on. ABS is activated during braking under certain road or If the “Anti-Lock Brake Warning Light”...
Page 321: Electronic Brake Control System
STARTING AND OPERATING 319 together to enhance vehicle stability and control in vari- WARNING! ous driving conditions and are commonly referred to as ESC. The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to Anti-Lock Brake System (ABS) interference caused by improperly installed or high This system aids the driver in maintaining vehicle control output radio transmitting equipment.
Page 322: Brake Assist System (Bas)
320 STARTING AND OPERATING spinning faster than the other, the system will apply the reduce brake pedal pressure unless braking is no longer brake of the spinning wheel. This will allow more engine desired. Once the brake pedal is released, the BAS is torque to be applied to the wheel that is not spinning.
Page 323: Hill Start Assist (Hsa) - If Equipped
STARTING AND OPERATING 321 Hill Start Assist (HSA) – If Equipped HSA Activation Criteria The HSA system is designed to assist the driver in The following criteria must be met in order for HSA to launching a vehicle on an incline. HSA will maintain the activate: level of brake pressure the driver inputs for a short •...
Page 324 322 STARTING AND OPERATING The system will only work if the intended direction of the 2. Shift the transmission into NEUTRAL. vehicle and vehicle gear match. For example, if the 3. Apply the parking brake. intended direction is forward up a hill and the vehicle is in DRIVE and the activation criteria are met, HSA will 4.
Page 325: Electronic Stability Control (Esc)
STARTING AND OPERATING 323 10. Repeat these steps if you want to return this feature may also be reduced to help the vehicle maintain the to it’s previous setting. desired path. ESC uses sensors in the vehicle to deter- mine the vehicle path intended by the driver and com- EVIC Equipped Vehicles pares it to the actual path of the vehicle.
Page 326 324 STARTING AND OPERATING ESC On WARNING! This is the normal operating mode for ESC. Whenever the vehicle is started the ESC system will be in this mode. The Electronic Stability Control (ESC) cannot pre- This mode should be used for almost all driving situa- vent the natural laws of physics from acting on the tions.
Page 327 STARTING AND OPERATING 325 WARNING! In partial ESC mode, the engine power reduction feature of ESC is disabled. Therefore, enhanced vehicle stability offered by the ESC system is re- duced. NOTE: To improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand or gravel, it may be desirable to switch to the “Partial Off”...
Page 328: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
326 STARTING AND OPERATING ESC Activation/Malfunction Indicator Light and Malfunction Indicator Light” begins to flash during ac- ESC OFF Indicator Light celeration, ease up on the accelerator and apply as little The “ESC Activation/Malfunction Indicator throttle as possible. Be sure to adapt your speed and Light”...
Page 329: Tire Safety Information
STARTING AND OPERATING 327 TIRE SAFETY INFORMATION NOTE: • P (Passenger) - Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 330 328 STARTING AND OPERATING • Temporary spare tires are high-pressure compact • High flotation tire sizing is based on U.S. design spares designed for temporary emergency use only. standards and it begins with the tire diameter molded Tires designed to this standard have the letter “T” into the sidewall.
Page 331 STARTING AND OPERATING 329 EXAMPLE: R = Construction code — R means radial construction — D means diagonal or bias construction 15 = Rim diameter in inches (in) Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol —...
Page 332 330 STARTING AND OPERATING EXAMPLE: Load Identification: ..blank..= Absence of any text on the sidewall of the tire indicates a Standard Load (SL) tire Extra Load (XL) = Extra load (or reinforced) tire Light Load = Light load tire C, D, E = Load range associated with the maximum load a tire can carry at a specified pressure Maximum Load —...
Page 333: Tire Identification Number (Tin)
STARTING AND OPERATING 331 Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side.
Page 334: Tire Terminology And Definitions
332 STARTING AND OPERATING Tire Terminology and Definitions Term Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold Tire Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
Page 335: Tire Loading And Tire Pressure
STARTING AND OPERATING 333 Tire Loading And Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle...
Page 336 334 STARTING AND OPERATING Loading occupants and cargo should never exceed XXX lbs or The vehicle maximum load on the tire must not exceed XXX kg” on the Tire and Loading Information placard. the load carrying capacity of the tire on your vehicle. You The combined weight of occupants, cargo/luggage and will not exceed the tire’s load carrying capacity if you trailer tongue weight (if applicable) should never exceed...
Page 337 STARTING AND OPERATING 335 4. The resulting figure equals the available amount of NOTE: • The following table shows examples on how to calcu- cargo and luggage load capacity. For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five late total load, cargo/luggage, and towing capacities 150 lb (68 kg) passengers in your vehicle, the amount of of your vehicle with varying seating configurations...
Page 338 336 STARTING AND OPERATING...
Page 339: Tires - General Information
STARTING AND OPERATING 337 Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 340: Tire Inflation Pressures
338 STARTING AND OPERATING Tire Inflation Pressures WARNING! (Continued) The proper cold tire inflation pressure is listed on the • Unequal tire pressures from one side of the ve- driver’s side B-Pillar. hicle to the other can cause the vehicle to drift to Some vehicles may have Supplemental Tire Pressure the right or left.
Page 341 STARTING AND OPERATING 339 Tire pressures change by approximately 1 psi (7 kPa) per CAUTION! 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the winter.
Page 342: Radial-Ply Tires
340 STARTING AND OPERATING loading may be required for high-speed vehicle opera- Radial-Ply Tires tion. Refer to original equipment or an authorized tire WARNING! dealer for recommended safe operating speeds, loading and cold tire inflation pressures. Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle WARNING! poorly.
Page 343: Compact Spare Tire - If Equipped
STARTING AND OPERATING 341 vehicle has an option for a spare tire matching original CAUTION! equipment tire and wheel, refer to the recommended tire rotation pattern in “Tire Rotation Recommendations” in Because of the reduced ground clearance, do not take “Starting and Operating”...
Page 344: Full Size Spare - If Equipped
342 STARTING AND OPERATING Since this tire has limited tread life the original equip- Full Size Spare – If Equipped ment tire should be repaired (or replaced) and reinstalled The full size spare is for temporary emergency use only. on your vehicle at the first opportunity. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not.
Page 345: Tire Spinning
STARTING AND OPERATING 343 your original equipment tire, replace (or repair) the Tire Spinning original equipment tire and reinstall on the vehicle at the When stuck in mud, sand, snow, or icy conditions, do not first opportunity. spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without WARNING! stopping.
Page 346: Tread Wear Indicators
344 STARTING AND OPERATING Tread Wear Indicators These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 in (2 mm).
Page 347: Replacement Tires
STARTING AND OPERATING 345 Keep dismounted tires in a cool, dry place with as little WARNING! exposure to light as possible. Protect tires from contact • Do not use a tire, wheel size or rating other than with oil, grease, and gasoline. that specified for your vehicle.
Page 348: Tire Chains
346 STARTING AND OPERATING WARNING! (Continued) CAUTION! • Failure to equip your vehicle with tires having Damage to the vehicle may result if tire chains are adequate speed capability can result in sudden tire used. failure and loss of vehicle control. SNOW TIRES CAUTION! Some areas of the country require the use of snow tires...
Page 349: Tire Rotation Recommendations
STARTING AND OPERATING 347 Snow tires generally have lower speed ratings than what TIRE ROTATION RECOMMENDATIONS was originally equipped with your vehicle and should Tires on the front and rear axles of vehicles operate at not be operated at sustained speeds over 75 mph different loads and perform different steering, driving, (120 km/h).
Page 350: Tire Pressure Monitor System (Tpms)
348 STARTING AND OPERATING The suggested rotation method is the “rearward cross” TIRE PRESSURE MONITOR SYSTEM (TPMS) shown in the following diagram. This rotation pattern The Tire Pressure Monitor System (TPMS) will warn the does not apply to some directional tires that must not be driver of a low tire pressure based on the vehicle recom- reversed.
Page 351 STARTING AND OPERATING 349 The TPM System will warn the driver of a low tire For example, your vehicle may have a recommended pressure if the tire pressure falls below the low-pressure cold (parked for more than three hours) placard pressure warning limit for any reason, including low temperature of 30 psi (207 kPa).
Page 352 350 STARTING AND OPERATING NOTE: CAUTION! • The TPMS is not intended to replace normal tire care • The TPMS has been optimized for the original and maintenance, or to provide warning of a tire failure or condition. equipment tires and wheels. TPMS pressures and warning have been established for the tire size •...
Page 353: Base System
STARTING AND OPERATING 351 • Seasonal temperature changes will affect tire pressure, Tire Pressure Monitoring Low Pressure Warnings and the TPMS will monitor the actual tire pressure in The “Tire Pressure Monitoring Telltale Light” will the tire. illuminate in the instrument cluster, a LOW TIRE message will be displayed for a minimum of five Base System seconds and a chime will sound when tire pressure is low...
Page 354 352 STARTING AND OPERATING sound a chime. If the ignition key is cycled, this sequence NOTE: will repeat, providing the system fault still exists. The 1. The compact spare tire (if equipped) does not have a “Tire Pressure Monitoring Telltale Light” will turn off tire pressure monitoring sensor.
Page 355: Premium System - If Equipped
STARTING AND OPERATING 353 4. For each subsequent ignition key cycle, a chime will NOTE: It is particularly important for you to check the sound and the “Tire Pressure Monitoring Telltale Light” tire pressure in all of the tires on your vehicle monthly will flash on and off for 75 seconds and then remain on and to maintain the proper pressure.
Page 356 354 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active road tires. In addition, the Electronic Vehicle Information Center (EVIC) will display a graphic showing the pressure values of each tire with the low tire pressure values flashing.
Page 357 STARTING AND OPERATING 355 will turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information. Check TPMS Warning When a system fault is detected, a chime will sound and the “Tire Pressure Monitoring Telltale Light”...
Page 358 356 STARTING AND OPERATING If the ignition key is cycled, this sequence will repeat, The EVIC will also display a CHECK TPM SYSTEM providing the system fault still exists. If the system fault message for a minimum of five seconds when a system no longer exists, the “Tire Pressure Monitoring Telltale fault related to an incorrect sensor location fault is Light”...
Page 359: General Information
STARTING AND OPERATING 357 Monitoring Telltale Light” will remain ON, a chime will the TPMS will update automatically. In addition, the sound, and the EVIC will still display a flashing pressure “Tire Pressure Monitoring Telltale Light” will turn OFF value in the graphic display. and the graphic in the EVIC will display a new pressure value instead of dashes (- -), as long no tire pressure is 3.
Page 360: Fuel Requirements
358 STARTING AND OPERATING The tire pressure sensors are covered under one of the as hard starting, stalling, and hesitations. If you experi- following licenses: ence these symptoms, try another brand of gasoline before considering service for the vehicle. United States ....KR5S18002015B Over 40 auto manufacturers worldwide have issued and Canada.
Page 361: Gasoline/Oxygenate Blends
STARTING AND OPERATING 359 The manufacturer supports the use of reformulated gaso- Problems that result from using gasoline containing line. Properly blended reformulated gasoline will pro- Methanol or gasoline containing more than 10% Ethanol vide excellent performance and durability of engine and are not the responsibility of the manufacturer and may fuel system components.
Page 362: Mmt In Gasoline
360 STARTING AND OPERATING To fix a Non-FFV vehicle inadvertently fueled once with therefore, you should ask your gasoline retailer whether E-85 perform the following: the gasoline contains MMT. It is even more important to look for gasoline without MMT in Canada, because MMT •...
Page 363: Fuel System Cautions
STARTING AND OPERATING 361 Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentra- performance: tions of methanol.
Page 364: Carbon Monoxide Warnings
362 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper WARNING! maintenance. Have the exhaust system inspected Carbon monoxide (CO) in exhaust gases is deadly. every time the vehicle is raised. Have any abnor- Follow the precautions below to prevent carbon mal conditions repaired promptly.
Page 365: Ethanol Fuel (E-85)
STARTING AND OPERATING 363 the other sections of this manual for information on CAUTION! features that are common between Flexible Fuel and gasoline-only powered vehicles. Only vehicles with the E-85 fuel filler door label can operate on E-85. Ethanol Fuel (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline.
Page 366: Fuel Requirements
Observing these precautions will avoid possible hard in MOPAR engine oils, and in equivalent oils meeting starting and/or significant deterioration in driveability Chrysler Specification MS-6395. The manufacturer re- during warm up. quires engine oils that are API Certified and meet the...
Page 367: Starting
Because E-85 fuel contains less energy per gallon/liter tensive fleet testing, to provide additional protection to than gasoline, you will experience an increase in fuel Chrysler Group LLC engines. Use MOPAR or an consumption. You can expect your miles per gallon equivalent oil meeting the specification MS-6395.
Page 368: Maintenance
366 STARTING AND OPERATING Maintenance CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect driveability. ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left rear quarter panel of the vehicle.
Page 369 STARTING AND OPERATING 367 CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap may cause the “Malfunc- tion Indicator Light (MIL)” to turn on. •...
Page 370: Loose Filler Cap Message
368 STARTING AND OPERATING Loose Filler Cap Message WARNING! (Continued) If the vehicles diagnostic system determines that the fuel • Never add fuel when the engine is running. This is filler cap in loose, improperly installed, or damaged, a in violation of most state and federal fire regula- “gASCAP”...
Page 371: Gross Vehicle Weight Rating (Gvwr)
STARTING AND OPERATING 369 The label contains the following information: Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. • Name of manufacturer This includes driver, passengers, and cargo. The total • Month and year of manufacture load must be limited so that you do not exceed the GVWR.
Page 372: Overloading
370 STARTING AND OPERATING Overloading Loading The load carrying components (axle, springs, tires, To load your vehicle properly, first figure out its empty wheels, etc.) of your vehicle will provide satisfactory weight, axle by axle and side by side. Store heavier items service as long as you do not exceed the GVWR and front down low and be sure you distribute their weight as and rear GAWR.
Page 373: Common Towing Definitions
STARTING AND OPERATING 371 To maintain warranty coverage, follow the requirements Gross Trailer Weight (GTW) and recommendations in this manual concerning ve- The GTW is the weight of the trailer plus the weight of all hicles used for trailer towing. cargo, consumables and equipment (permanent or tem- porary) loaded in or on the trailer in its loaded and If you have any questions or concerns after reviewing...
Page 374 372 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Trailer Tongue Weight (TW) The GAWR is the maximum capacity of the front and rear The tongue weight is the downward force exerted on the axles. Distribute the load over the front and rear axles hitch ball by the trailer.
Page 375: Trailer Hitch Classification
STARTING AND OPERATING 373 Trailer Hitch Classification Trailer Hitch Classification Definitions The following chart provides the industry standard for Class Max. Trailer Hitch Industry the maximum trailer weight a given trailer hitch class can Standards tow and should be used to assist you in selecting the Class I - Light Duty 2,000 lbs (907 kg) correct trailer hitch for your intended towing condition.
Page 376: Trailer Towing Weights (Maximum Trailer Weight Ratings)
374 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum Trailer Weight Ratings Max. GTW (Gross Trailer Max. Trailer Tongue Wt. Engine/Transmission Max. Frontal Area Wt.) (See Note 1) 2.4L/Auto...
Page 377: Trailer And Tongue Weight
STARTING AND OPERATING 375 CAUTION! Towing a trailer with a larger than recommended frontal area could cause the engine to overheat or cause severe engine damage under extreme condi- tions. Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer.
Page 378: Towing Requirements
376 STARTING AND OPERATING NOTE: Remember that everything put into or on the Towing Requirements trailer adds to the load on your vehicle. Also, additional To promote proper break-in of your new vehicle drive- factory-installed options, or authorized dealer-installed train components the following guidelines are recom- options, must be considered as part of the total load on mended: your vehicle.
Page 379 STARTING AND OPERATING 377 WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to a collision. Follow these vehicle and trailer. Always connect the chains to guidelines to make your trailer towing as safe as the frame or hook retainers of the vehicle hitch.
Page 380 378 STARTING AND OPERATING • Check for signs of tire wear or visible tire damage WARNING! (Continued) before towing a trailer. Refer to “Tires – General 3. GAWR Information” in “Starting and Operating” for informa- 4. Trailer tongue weight rating for the trailer hitch tion on tread wear indicators and for proper inspection utilized (This requirement may limit the ability to procedure.
Page 381 STARTING AND OPERATING 379 • An electronically actuated trailer brake controller is WARNING! required when towing a trailer with electronically • Do not connect trailer brakes to your vehicle’s actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic hydraulic brake lines.
Page 382: Towing Tips
380 STARTING AND OPERATING Towing Tips If you REGULARLY TOW a trailer for more than 45 min- Before setting out on a trip, practice turning, stopping, utes of continuous operation, then change the automatic and backing the trailer in an area located away from transmission fluid and filter according to the interval heavy traffic.
Page 383: (Behind Motorhome, Etc.)
STARTING AND OPERATING 381 • Use speed control in flat terrain and with light loads to RECREATIONAL TOWING (BEHIND maximize fuel efficiency. MOTORHOME, ETC.) Cooling System Towing This Vehicle Behind Another Vehicle To reduce potential for engine and transmission over- Recreational towing is not allowed.
Page 384 382 STARTING AND OPERATING CAUTION! Towing this vehicle in violation of the above require- ments can cause severe transmission damage. Dam- age from improper towing is not covered under the New Vehicle Limited Warranty.
Page 385: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flashers ....384 Jump-Starting ......394 ▫...
Page 386: Hazard Warning Flashers
384 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate ac- tion.
Page 387: Engine Oil Overheating - 2.4L Engine Only (If Equipped)
WHAT TO DO IN EMERGENCIES 385 Engine Oil Overheating — 2.4L Engine Only (If CAUTION! Equipped) During sustained high-speed driving or trailer tow up Driving with a hot cooling system could damage your long grades on hot day, the engine oil temperature may vehicle.
Page 388: Jacking And Tire Changing
386 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) • The jack is designed to be used as a tool for WARNING! changing tires only. The jack should not be used to • Do not attempt to change a tire on the side of the lift the vehicle for service purposes.
Page 389: Preparations For Jacking
WHAT TO DO IN EMERGENCIES 387 Spare Tire Removal Preparations For Jacking Lift up the load floor cover and remove the hold down. 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
Page 390: Jacking Instructions
388 WHAT TO DO IN EMERGENCIES 5. Turn OFF the ignition. Jacking Instructions 6. Block both the front and rear of the WARNING! wheel diagonally opposite the jacking position. For example, if changing the Carefully follow these tire changing warnings to right front tire, block the left rear help prevent personal injury or damage to your wheel.
Page 391 WHAT TO DO IN EMERGENCIES 389 WARNING! (Continued) CAUTION! • Do not let anyone sit in the vehicle when it is on a Do not attempt to raise the vehicle by jacking on jack. locations other than those indicated in the Jacking •...
Page 392 390 WHAT TO DO IN EMERGENCIES NOTE: The jack handle attaches to the side of the jack 2. Loosen, but do not remove, the wheel nuts by turning with two attachment points. When the jack is partially them to the left one turn while the wheel is still on the expanded, the tension between the two attachment ground.
Page 393 WHAT TO DO IN EMERGENCIES 391 Front Jacking Location Rear Jacking Location 4. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed.
Page 394 392 WHAT TO DO IN EMERGENCIES WARNING! CAUTION! Raising the vehicle higher than necessary can make Be sure to mount the spare tire with the valve stem the vehicle less stable. It could slip off the jack and facing outward. The vehicle could be damaged if the hurt someone near it.
Page 395 WHAT TO DO IN EMERGENCIES 393 7. Lower the vehicle by turning the jack screw to the left. WARNING! 8. Finish tightening the nuts. Push down on the wrench A loose tire or jack thrown forward in a collision or while tightening the wheel nuts.
Page 396: Jump-Starting
394 WHAT TO DO IN EMERGENCIES JUMP-STARTING WARNING! If your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in Do not attempt jump-starting if the battery is frozen. another vehicle or by using a portable battery booster It could rupture or explode and cause personal injury.
Page 397 WHAT TO DO IN EMERGENCIES 395 WARNING! • Take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact.
Page 398: Jump-Starting Procedure
396 WHAT TO DO IN EMERGENCIES 3. Remove the protective cover over the remote positive WARNING! (+) battery post. To remove the cover, press the locking tab and pull upward on the cover. Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result.
Page 399 WHAT TO DO IN EMERGENCIES 397 1. Connect the positive (+) end of the jumper cable to the 5. Start the engine in the vehicle that has the booster remote positive (+) post of the discharged vehicle. battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery.
Page 400: Freeing A Stuck Vehicle
398 WHAT TO DO IN EMERGENCIES 10. Reinstall the protective cover over the remote posi- front wheels. Then shift back and forth between DRIVE tive (+) battery post of the discharged vehicle. and REVERSE. Using minimal accelerator pedal pressure to maintain the rocking motion, without spinning the If frequent jump-starting is required to start your vehicle wheels, is most effective.
Page 401: Shift Lever Override
WHAT TO DO IN EMERGENCIES 399 CAUTION! WARNING! • When “rocking” a stuck vehicle by moving be- Fast spinning tires can be dangerous. Forces gener- tween DRIVE and REVERSE, do not spin the ated by excessive wheel speeds may cause damage, or wheels faster than 15 mph (24 km/h), or drivetrain even failure, of the axle and tires.
Page 402: Towing A Disabled Vehicle
400 WHAT TO DO IN EMERGENCIES 3. Turn the ignition to the ON/RUN position without 6. Move the shift lever into the NEUTRAL position. starting the engine. 7. The vehicle may then be started in NEUTRAL. 4. Press and maintain firm pressure on the brake pedal. 8.
Page 403 WHAT TO DO IN EMERGENCIES 401 Proper towing or lifting equipment is required to prevent CAUTION! (Continued) damage to your vehicle. Use only tow bars and other • When securing the vehicle to a flatbed truck, do equipment designed for the purpose, following equip- not attach to front or rear suspension components.
Page 404: Without The Ignition Key
402 WHAT TO DO IN EMERGENCIES • The distance to be traveled must not exceed 15 mi Without The Ignition Key (24 km). Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flatbed towing is •...
Page 405: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Oil ......411 Engine Compartment — 2.4L ... . . 405 ▫...
Page 406 404 MAINTAINING YOUR VEHICLE ▫ Exhaust System ..... 421 Replacement Bulbs ....448 ▫...
Page 407: Engine Compartment - 2.4L
MAINTAINING YOUR VEHICLE 405 ENGINE COMPARTMENT — 2.4L 1 — Engine Coolant Reservoir 7 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 8 — Engine Oil Fill 3 — Automatic Transmission Dipstick 9 — Coolant Pressure Cap 4 — Brake Fluid Reservoir 10 —...
Page 408: Engine Compartment - 3.6L
406 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT – 3.6L 1 — Engine Coolant Reservoir 5 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 6 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 7 — Engine Oil Fill 4 — Totally Integrated Power Module (Fuses) 8 —...
Page 409: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 407 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
Page 410: Emissions Inspection And Maintenance Programs
408 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the Normally, the OBD II system will be ready. The OBD II vehicle is started. This might indicate a damaged cap. If system may not be ready if your vehicle was recently the problem is detected twice in a row, the system will serviced, recently had a dead battery or a battery replace- turn on the “Malfunction Indicator Light (MIL).”...
Page 411: Replacement Parts
MAINTAINING YOUR VEHICLE 409 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a.
Page 412: Dealer Service
Only do service work for which you mance. Immediately have potential malfunctions have the knowledge and the proper equipment. If examined by an authorized Chrysler Group LLC you have any doubt about your ability to perform a dealership or qualified repair center.
Page 413: Engine Oil
MAINTAINING YOUR VEHICLE 411 fully warmed engine is shut off. Do not check oil level CAUTION! (Continued) before starting the engine after it has sat overnight. • Your vehicle has been built with improved fluids Checking engine oil level when the engine is cold will that protect the performance and durability of give you an incorrect reading.
Page 414 API Certified and meet the will cause oil aeration, which can lead to loss of oil requirements of Chrysler Material Standard MS-6395. pressure and an increase in oil temperature. This could damage your engine. Also, be sure the oil fill American Petroleum Institute (API) Engine Oil cap is replaced and tightened after adding oil.
Page 415 MAINTAINING YOUR VEHICLE 413 Lubricants which do not have both the engine oil certi- CAUTION! fication mark and the correct SAE viscosity grade num- ber should not be used. Do not use chemical flushes in your engine oil as the chemicals can damage your engine.
Page 416: Engine Oil Filter
414 MAINTAINING YOUR VEHICLE Lubricants which do not have both, the engine oil certi- station, or governmental agency for advice on how and fication mark and the correct SAE viscosity grade num- where used oil and oil filters can be safely discarded in ber should not be used.
Page 417: Engine Air Cleaner Filter
MAINTAINING YOUR VEHICLE 415 Engine Air Cleaner Filter used to assure most efficient service. MOPAR engine air cleaner filters are high quality and are recommended. WARNING! Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. The air induction system (air cleaner, hoses, etc.) can You will never have to add water, nor is periodic main- provide a measure of protection in the case of engine tenance required.
Page 418 416 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can • It is essential when replacing the cables on the burn or even blind you. Do not allow battery fluid battery that the positive cable is attached to the to contact your eyes, skin, or clothing.
Page 419: Air Conditioner Maintenance
MAINTAINING YOUR VEHICLE 417 Air Conditioner Maintenance WARNING! For best possible performance, your air conditioner • Use only refrigerants and compressor lubricants should be checked and serviced by an authorized dealer at the start of each warm season. This service should approved by the manufacturer for your air condi- include cleaning of the condenser fins and a performance tioning system.
Page 420: A/C Air Filter - If Equipped
418 MAINTAINING YOUR VEHICLE Refrigerant Recovery and Recycling The A/C Air Filter is located in the fresh air inlet behind R-134a air conditioning refrigerant is a hydrofluoro- the glove box. Perform the following procedure to re- carbon (HFC) that is endorsed by the Environmental place the filter: Protection Agency and is an ozone-saving product.
Page 421: Body Lubrication
MAINTAINING YOUR VEHICLE 419 CAUTION! The A/C Air Filter is identified with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. 8. Reinstall the glove box door dampener and glove box. Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate,...
Page 422: Windshield Wiper Blades
420 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. Operation of the wipers on dry glass for long periods When performing other underhood services, the hood may cause deterioration of the wiper blades. Always use latch, release mechanism and safety catch should be washer fluid when using the wipers to remove salt or dirt cleaned and lubricated.
Page 423: Adding Washer Fluid
MAINTAINING YOUR VEHICLE 421 Adding Washer Fluid Exhaust System The fluid reservoir for the windshield washers is located The best protection against carbon monoxide entry into in the engine compartment. Be sure to check the fluid the vehicle body is a properly maintained engine exhaust level in the reservoir at regular intervals.
Page 424 422 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions con- and can eventually poison you.
Page 425 MAINTAINING YOUR VEHICLE 423 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
Page 426: Cooling System
424 MAINTAINING YOUR VEHICLE Cooling System rusty in appearance, the system should be drained, flushed, and refilled with fresh engine coolant (anti- WARNING! freeze). Check the front of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty, clean by gently •...
Page 427 MAINTAINING YOUR VEHICLE 425 Selection Of Coolant CAUTION! (Continued) Use only the manufacturer’s recommended coolant. Re- • Do not use water alone or alcohol-based engine fer to “Fluids, Lubricants, and Genuine Parts” in “Main- coolant (antifreeze) products. Do not use addi- taining Your Vehicle”...
Page 428 426 MAINTAINING YOUR VEHICLE replacement. To prevent reducing this extended mainte- (antifreeze) solution. The use of lower quality water nance period, it is important that you use the same will reduce the amount of corrosion protection in the engine coolant (antifreeze) throughout the life of your engine cooling system.
Page 429 MAINTAINING YOUR VEHICLE 427 rules for your community. To prevent ingestion by ani- WARNING! mals or children, do not store ethylene glycol based • The warning words “DO NOT OPEN HOT” on engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground.
Page 430 428 MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is If an examination of your engine compartment shows no no need to remove the radiator cap unless checking for evidence of radiator or hose leaks, the vehicle may be engine coolant (antifreeze) freeze point or replacing cool- safely driven.
Page 431: Brake System
MAINTAINING YOUR VEHICLE 429 • Make sure that the radiator and coolant recovery WARNING! bottle overflow hoses are not kinked or obstructed. Riding the brakes can lead to brake failure and • Keep the front of the radiator clean. If your vehicle is possibly a collision.
Page 432 430 MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing WARNING! the cap. If necessary, add fluid to bring the fluid level up • Use only manufacturer’s recommended brake to the requirements described on the brake fluid reser- voir.
Page 433: Automatic Transmission
MAINTAINING YOUR VEHICLE 431 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contami- moisture, use only new brake fluid or fluid that nate the brake fluid. Brake seal components could has been in a tightly closed container.
Page 434 432 MAINTAINING YOUR VEHICLE Selection of Lubricant Special Additives It is important that the proper lubricant is used in the Automatic Transmission Fluid (ATF) is an engineered transmission to assure optimum transmission performance. product and its performance may be impaired by supple- Use only the manufacturer’s recommended transmission mental additives.
Page 435 MAINTAINING YOUR VEHICLE 433 Fluid Level Check – 2.4L Engine driven at least 15 miles (24 km). Hot fluid cannot be held Use the following procedure to check the automatic comfortably between the fingertips. Cold fluid is at a transmission fluid level properly: temperature below 80°F (27°...
Page 436: Appearance Care And Protection From Corrosion
434 MAINTAINING YOUR VEHICLE Fluid Level Check – 3.6L Engine CAUTION! The automatic transmission has no dipstick and is dealer • Using a transmission fluid other than the manu- serviced only. facturer’s recommended fluid may cause deterio- Transmission Fluid and Filter Changes ration in transmission shift quality and/or torque Refer to the “Maintenance Schedule”...
Page 437 MAINTAINING YOUR VEHICLE 435 hot or cold weather and other extreme conditions will Washing have an adverse effect on paint, metal trim, and under- • Wash your vehicle regularly. Always wash your ve- body protection. hicle in the shade using MOPAR Car Wash or equiva- The following maintenance recommendations will enable lent, or a mild car wash soap, and rinse the panels you to obtain maximum benefit from the corrosion...
Page 438 436 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is • Do not use abrasive or strong cleaning materials considered the responsibility of the owner. such as steel wool or scouring powder, which will •...
Page 439 MAINTAINING YOUR VEHICLE 437 Wheel and Wheel Trim Care To minimize the possibility of scratching the lenses and All wheels and wheel trim, especially aluminum and reducing light output, avoid wiping with a dry cloth. To chrome-plated wheels, should be cleaned regularly with remove road dirt, wash with a mild soap solution fol- a mild soap and water to prevent corrosion.
Page 440 438 MAINTAINING YOUR VEHICLE • For grease stains, apply MOPAR Multi-Purpose if absolutely necessary. Do not use harsh cleaners or Cleaner or equivalent to a clean, damp cloth and Armor All . Use MOPAR Total Clean or equivalent to remove the stain. Use a fresh, damp towel to remove clean vinyl upholstery.
Page 441 MAINTAINING YOUR VEHICLE 439 Cleaning Plastic Instrument Cluster Lenses WARNING! The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care Do not use volatile solvents for cleaning purposes. must be taken to avoid scratching the plastic. Many are potentially flammable, and if used in closed areas they may cause respiratory harm.
Page 442: Cleaning Center Console Cupholders
440 MAINTAINING YOUR VEHICLE Replace the belts if they appear frayed or worn or if the Convertible Top Care buckles do not work properly. CAUTION! Cleaning Center Console Cupholders Failure to follow these cautions may cause interior Removal water damage, stains or mildew on the top material: Grab the rubber portion of the cupholder and lift upward.
Page 443 MAINTAINING YOUR VEHICLE 441 Immediate removal of any contaminant is recommended. General Cleaning Regular washing of the top will enhance its life and Careful vacuuming of the top before washing is helpful appearance, and make successive cleanings easier. Do not in removing dust and other foreign particles.
Page 444: Weather Strip Care - Soft And Hard Top
442 MAINTAINING YOUR VEHICLE the top fabric and to prevent streaking on painted and Protection chrome surfaces. Allow the top to dry before lowering. For appearance purposes, you may wish to protect your Vacuuming the top with a wet/dry shop vacuum will cloth top periodically.
Page 445: Fuses
MAINTAINING YOUR VEHICLE 443 FUSES Totally Integrated Power Module The Totally Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover.
Page 446 444 MAINTAINING YOUR VEHICLE Cartridge Cartridge Cavity Mini Fuse Description Cavity Mini Fuse Description Fuse Fuse 40 Amp Power Top Module 30 Amp Ignition Off Draw — — Green – If Equipped Green (IOD) Sense 2 20 Amp Battery Feed – —...
Page 447 MAINTAINING YOUR VEHICLE 445 Cartridge Cartridge Cavity Mini Fuse Description Cavity Mini Fuse Description Fuse Fuse 10 Amp 15 Amp — Instrument Panel — Radio Lt. Blue 40 Amp 10 Amp — Radiator Fan Relay — Siren – If Equipped Green Cigar Lighter/ Ignition Run –...
Page 448 446 MAINTAINING YOUR VEHICLE Cartridge Cartridge Cavity Mini Fuse Description Cavity Mini Fuse Description Fuse Fuse Ignition Run – Oc- 10 Amp Headlamp Washer — cupant Classifica- – If Equipped 10 Amp tion Module 30 Amp Auto Shutdown — — (OCM)/Occupant Pink (ASD) Relay 1...
Page 449 MAINTAINING YOUR VEHICLE 447 Cartridge CAUTION! Cavity Mini Fuse Description Fuse • When installing the Totally Integrated Power Anti-Lock Brakes Module cover, it is important to ensure the cover is (ABS) Module – If properly positioned and fully latched. Failure to Equipped/ 40 Amp —...
Page 450: Vehicle Storage
448 MAINTAINING YOUR VEHICLE VEHICLE STORAGE REPLACEMENT BULBS If you will not be using your vehicle for more than All the inside bulbs are brass or glass wedge base. 21 days, you may want to take steps to preserve your Aluminum base bulbs are not approved and should not battery.
Page 451: Bulb Replacement
MAINTAINING YOUR VEHICLE 449 Headlamp LIGHT BULBS – Exterior Bulb No. Bi-Halogen Headlamp ....HIR2 1. Raise and prop open the hood. Locate the connector Front Turn Signal Lamp .
Page 452: Front Turn Signal
450 MAINTAINING YOUR VEHICLE 5. If the bulb comes in contact with any oily surface, Front Fog Lamp clean the bulb with rubbing alcohol. NOTE: Access to the lamps through the lower fascia 6. Reinsert the bulb and socket assembly and rotate cutout is limited.
Page 453: Backup Lamps
MAINTAINING YOUR VEHICLE 451 3. Install the bulb and connector assembly into the fog lamp housing and rotate the connector one-quarter turn clockwise to lock it in place. Backup Lamps 1. Open the trunk and gently pull back the trunk liner behind the tail lamp.
Page 454: License Plate Lamp
452 MAINTAINING YOUR VEHICLE 3. Grasp the tail lamp and pull firmly outward pushing 4. Twist and remove socket from lamp. on the studs from inside to disengage the lamp housing. 5. Remove bulb from socket and replace. NOTE: Placing a small flat head screwdriver or similar License Plate Lamp tool between the lamp outboard ball stud and plastic grommet from inside the trunk can assist in lamp re-...
Page 455: Fluid Capacities
MAINTAINING YOUR VEHICLE 453 FLUID CAPACITIES U.S. Metric Fuel (Approximate) All Engines — (Except 2.4L PZEV) 16.9 Gallons 64 Liters 2.4L PZEV (Partial Zero Emissions Vehicle) 18.5 Gallons 70 Liters Engine Oil with Filter 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 4.4 Liters 3.6L Engine (SAE 5W-30, API Certified)
Page 456: Fluids, Lubricants, And Genuine Parts
Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Engine Oil – 2.4L Engine Chrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade. Use API Certified SAE 5W-30 Engine Oil, meeting Chrysler Material Stan- Engine Oil –...
Page 457: Chassis
MAINTAINING YOUR VEHICLE 455 Chassis Component Fluid, Lubricant, or Genuine Part MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed Automatic Transmission ATF+4 product. MOPAR DOT 3 and SAE J1703 should be used. If DOT 3 brake fluid is not Brake Master Cylinder available, then DOT 4 is acceptable.
Page 459 MAINTENANCE SCHEDULES CONTENTS ▫ Required Maintenance Intervals ..460 Maintenance Schedule ....458...
Page 460 458 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE Based on engine operation conditions the oil change The Scheduled Maintenance services listed in this indicator message will illuminate, this means that service manual must be done at the times or mileages specified is required for your vehicle. Have your vehicle serviced to protect your vehicle warranty and ensure the best as soon as possible, within the next 500 miles (805 km).
Page 461 MAINTENANCE SCHEDULES 459 Your authorized dealer will reset the oil change indicator Once a Month message after completing the scheduled oil change. If a • Check tire pressure and look for unusual wear or scheduled oil change is performed by someone other damage.
Page 462 460 MAINTENANCE SCHEDULES CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle. Required Maintenance Intervals Refer to the Maintenance Schedules on the following pages for the required maintenance intervals.
Page 463 ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer...
Page 464: Service Schedule
❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for ❏ Inspect exhaust system. damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer...
Page 465 ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer...
Page 466 ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer...
Page 467 ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer...
Page 468 ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer...
Page 469 ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for not done at 60 months. damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer...
Page 470 ❏ Replace the accessory drive belt(s). Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer...
Page 471 ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer...
Page 472 • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer...
Page 473: If You Need Consumer Assistance
Reporting Safety Defects ....476 ▫ Chrysler Group LLC Customer Center ..474 ▫ In The 50 United States And Washington, D.C.
Page 474 472 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... 479 Publication Order Forms ....477 ▫...
Page 475: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 473 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
Page 476: Chrysler Group Llc Customer Center
• Vehicle delivery date and mileage This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- Chrysler Group LLC Customer Center solved with this process. P.O. Box 21–8004 • If for some reason you are still not satisfied, talk to the Auburn Hills, MI 48321–8004...
Page 477: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
IF YOU NEED CONSUMER ASSISTANCE 475 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
Page 478: Warranty Information
See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
Page 479: In Canada
IF YOU NEED CONSUMER ASSISTANCE 477 If NHTSA receives similar complaints, it may open an In Canada investigation, and if it finds that a safety defect exists in If you believe that your vehicle has a safety defect, you a group of vehicles, it may order a recall and remedy should contact the Customer Service Department imme- campaign.
Page 480 These Owner’s Manuals have been prepared with the vehicle, system, and/or components is written in assistance of service and engineering specialists to straightforward language with illustrations, diagrams, acquaint you with specific Chrysler Group LLC ve- and charts. hicles. Included are starting, operating, emergency • Diagnostic Procedure Manuals and maintenance procedures as well as specifications, capabilities and safety tips.
Page 481 IF YOU NEED CONSUMER ASSISTANCE 479 Call toll free at: Treadwear The Treadwear grade is a comparative rating, based on • 1–800–890–4038 (U.S.) the wear rate of the tire when tested under controlled • 1–800–387–1143 (Canada) conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded Visit us on the Worldwide Web at:...
Page 482 480 IF YOU NEED CONSUMER ASSISTANCE Vehicle Safety Standard No. 109. Grades B and A repre- WARNING! sent higher levels of performance on the laboratory test wheel, than the minimum required by law. The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not WARNING! include acceleration, cornering, hydroplaning, or...
Page 483 INDEX...
Page 484 482 INDEX About Your Brakes ..... . . 314 Airbag Maintenance ..... . . 65 ABS (Anti-Lock Brake System) .
Page 485 INDEX 483 Automatic Headlights ....160 Keyless Transmitter Replacement (RKE) ..24 Automatic Oil Change Indicator ..200,213 Location .
Page 486 484 INDEX Capacities, Fluid ......453 Child Restraint Tether Anchors ... . . 72,74 Caps, Filler Cigar Lighter .
Page 487 INDEX 485 Contract, Service ......475 Customer Programmable Features ... . 219 Convertible .
Page 488 486 INDEX Engine Oil ......414 Emergency, In Case of Door Locks ......29 Jacking .
Page 489 INDEX 487 Jump Starting ......394 Exterior Lights ......83 Oil .
Page 490 488 INDEX Replacement Parts ..... 365 Additives ......360 Starting .
Page 491 INDEX 489 Gas Cap (Fuel Filler Cap) ... . 366,368,407 Hazard Gasoline, Clean Air ..... . 358 Driving Through Flowing, Rising, or Gasoline, Reformulated .
Page 492 490 INDEX Heated Seats ......150 Instrument Cluster ....193,194 Heater .
Page 493 INDEX 491 Keyless Entry System ..... . 19 Back-Up ......451 Keys .
Page 494 492 INDEX Illuminated Entry ..... . . 18 Loading Vehicle ..... . 368,370 Instrument Cluster .
Page 495 INDEX 493 Manual, Service ......477 New Vehicle Break-In Period ....78 Map/Reading Lights .
Page 496 494 INDEX Filter Disposal ......414 Personal Settings ......219 Identification Logo .
Page 497 INDEX 495 Programming Transmitters Starting System ......26 (Remote Keyless Entry) ....19 Remote Keyless Entry (RKE) .
Page 498 496 INDEX Safety Information, Tire ....327 Easy Entry ......153 Safety Tips .
Page 499 INDEX 497 Shift Lever Override ..... . 399 Starting and Operating ....298 Shifting Starting Procedures .
Page 500 498 INDEX Telescoping Steering Column ....170 High Speed ......339 Temperature Control, Automatic (ATC) .
Page 501 INDEX 499 Tonneau Cover ......89 Filter ....... 434 Towing .
Page 502 500 INDEX Trunk Release, Emergency ....36 Vehicle Storage ..... . . 289,448 Turn Signals .
Page 503 INDEX 501 Windows ......32 Windshield Wipers ..... . . 165 Power .
Page 504 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 505 Chrysler Group LLC 11C27-126-AB Printed in U.S.A. Second Edition...

Chrysler 200 Convertible Owner's Manual

Table of Contents

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Chrysler 200 Convertible

Summary of Contents for Chrysler 200 Convertible