Inserting The Sd Memory Card; Removing The Sd Memory Card - Sanyo PLC-XU88-WXU30 Owner's Manual

Memory viewer function

Inserting the SD memory card

Insert the SD memory card into the card slot on the back side of the projector as shown in the figure
below.

Removing the SD memory card

Push the SD memory card in the arrow direction gently to remove. The card comes out and you can
remove it.
Note:
During accessing to the SD memory card, do not tun off the power or eject the card because the data
in the card might get damaged. During accessing, the SD memory card indicator is blinking
The SD memory card allows you to insert or remove regardless of the power status of the projector.
4
Insert a card with
cutting side up until
it clicks.
Push the card until
it clicks. The card
comes out.