Parts Identification - Tecumseh VLV Technician's Handbook

NOTE
On newer VLV models the breather
tube will be a straight hose.
Optional
Pre-Filter

Parts Identification

This is a parts breakdown of a typical VLV engine. Use
this parts breakdown to identify parts. When ordering
parts always refer to the engine model and specification
number stamped on the engine blower housing.
Carburetor and starter breakdowns are found in the
chapters referring to their repair.
1-2
Model and Serial
Numbers Located
H e r e
If the short block has been replaced, an identification
tag for service parts is located on the valve box cover.
SBV-XXX
SER-XXX
106
NOTE
695578