To Select A Mode - Casio 5423 Operation Manual

Operation Guide 5423

To select a mode

Press C to cycle between the modes as shown below. The n Right Dial Hand
indicates the currently selected mode.
C
Timekeeping Mode
The hand indicates the
day of the week (SU,
M, T, W, T, F, S).
n
E-30
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
Note
This watch does not have a city code that
corresponds to Newfoundland.
1. In the Timekeeping Mode, keep A depressed (for
about fi ve seconds) as the x Second Hand goes
through the following sequence.
Moves to Y (or YES for some models) or N (NO)
x
to indicate the last signal reception result, then
to R (READY), and then to the city code of the
currently selected Home City.
This indicates the city code setting mode.
E-32
In the city code setting mode, the n Right Dial Hand indicates the current
daylight saving time setting as STD (standard time) or DST (daylight saving
time).
Note that you cannot switch between STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
4. After all the settings are the way you want, press A to return to the Timekeeping
Mode.
To toggle the Home City time between standard time and daylight saving time
1. Perform the step 1 under "To confi gure Home City settings" on page E-32.
Each time you select a city code, the z Hour Hand, c Minute Hand, and v 24-
hour Hand move to the current time for that city code. Do not perform the next
operation until these hands stop moving.
2. Press B to toggle the time for the city code of the currently selected Home City
between STD (standard time)/DST (daylight saving time).
E-34
Confi guring Current Time and Date Settings Manually
You can confi gure current time and date settings manually when the watch is unable
to receive a time calibration signal.
To change the current time setting manually
1. In the Timekeeping Mode, keep A depressed (for about
fi ve seconds) as the x Second Hand goes through the
following sequence.
Moves to Y (or YES for some models) or N (NO)
to indicate the last signal reception result, then to
R (READY), and then to the city code of the currently
selected Home City.
At this time, the n Right Dial Hand will indicate the
x n Home City's current daylight saving time setting (STD
or DST).
E-36
4. Use D (+) and B (–) to change the time (hour and minute) setting.
Each press of either button will move the hands (z Hour Hand and c Minute
Hand) one minute.
Holding down D or B will start high-speed z Hour Hand and c Minute Hand
movement in the applicable direction. To stop high-speed hand movement,
press any button.
The v 24-hour Hand and z Hour Hand move in sync with each other.
When setting the time, make sure that the v 24-hour Hand indicates the proper
a.m./p.m. hour.
If you want to change the date setting at this time, press C and perform the
procedure starting from step 3 under "To change the current date setting
manually" (page E-39).
5. After the time setting is the way you want, press A to return to the Timekeeping
Mode.
This will cause the x Second Hand to move automatically to 12 o'clock and
resume movement from there.
E-38
Timekeeping
Use the Timekeeping Mode to view the current time and date. To enter the
Timekeeping Mode from any other mode, hold down C for about two seconds.
Stopwatch Mode
The hand points to 0 (at
12 o'clock).
World Time Mode
The hand points to STD
or DST.
3. Press B to toggle the time for the currently selected city code between STD
(standard time)/DST (daylight saving time).
3. After the setting is the way you want, press A to return to the Timekeeping Mode.
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
Selecting some city codes makes it possible for the watch to receive the time
calibration signal for the corresponding area automatically. See page E-16 for details.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The
reference point for UTC is Greenwich, England.
3. Press C.
To change the current date setting manually
Setting the year (tens digit)
3. Use D and B to change the year setting.
Hand Functions
z x c
z Hour Hand
x Second Hand
c Minute Hand
v 24-hour Hand
b Left Dial Hands: Indicate the current time in the World
n Right Dial Hand: Indicates the day of the week.
m Day Indicator
v b n m
The watch will exit the setting mode automatically if
z c
you do not perform any operation for about two or
three minutes.
For details about city codes, see the "City Code
Table" at the back of this manual.
2. To change the Home City setting, press D to move the
x Second Hand clockwise.
Keep pressing D until the x Second Hand is pointing
at the city code you want to select as your Home City.
Each time you select a city code, the z Hour Hand,
v x n m
c Minute Hand, v 24-hour Hand and m Day
Indicator move to the current time and date for that
city code. Do not perform the next operation until
these hands stop moving.
In the city code setting mode, the n Right Dial Hand indicates the current
daylight saving time setting as STD (standard time) or DST (daylight saving
time).
Note that you cannot switch between STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
z x c 2. Change the Home City and daylight saving time (DST)
settings, if you want.
For details about these settings, see steps 2 and 3
under "To confi gure Home City settings" (page E-32).
In the following steps, each press of C cycles
between settings as shown below.
Home city/DST
v n
The x Second Hand and n Right Dial Hand will move to their 12 o'clock
positions. This is the time setting mode.
1. In the Timekeeping Mode, keep A depressed (for
00
about fi ve seconds) as the x Second Hand goes
n
90 10 through the following sequence.
Moves to Y (or YES for some models) or N (NO)
80 20
to indicate the last signal reception result, then to
70 30
R (READY), and then to the city code of the currently
selected Home City.
60 40
50 2. Press C twice so the n Right Dial Hand moves to the
tens digit and the x Second Hand moves to the ones
digit of the current year setting.
This is the year setting mode.
The year can be set in the range of 2000 to 2099.
Each press of B will move the n Right Dial Hand and change the tens digit of
the year setting.
Time City (page E-46) in 24-hour format.
E-31
E-33
E-35
C C
Hour/Minute Year
C C
Day Month
C
E-37
E-39