Denon AVR-X1200W Owner's Manual page 159

Contents Connections
o MultEQ ® XT
MultEQ ® XT compensates for both time and frequency characteristics
of the listening area based on Audyssey
Selection is done from three types of compensation curves. We
recommend the "Reference" setting.
Reference
(Default):
L/R Bypass:
Flat:
Off :
0 When using headphones, "MultEQ
Front panel Display
Playback
® Setup measurement results.
Selects the default calibrated setting with
a slight roll off at high frequencies, which
is optimized for movies.
Selects the reference setting, but
bypasses MultEQ ® XT on the front left
and right speakers.
Selects the calibrated setting which is
optimized for small rooms where your
listening position is closer to the
speakers.
Do not use "MultEQ XT".
®
® XT" is automatically set to "Off".
Rear panel
Settings
o Dynamic EQ
Solves the problem of deteriorating sound quality as volume is
decreased by taking into account human perception and room
acoustics.
Works with MultEQ ® XT.
On
(Default):
Off:
0 When the menu "Dynamic EQ" setting is "On", it is not possible to do "Tone"
adjustment. (v p. 116)
159
Remote
Tips Appendix
Use Dynamic EQ.
Do not use Dynamic EQ.
Index