Denon AVR-X1200W Owner's Manual page 124

Contents Connections
DTS sound mode
Sound mode type
DTS Surround This mode can be selected when playing sources recorded in DTS.
This mode is suitable for playing discs recorded in DTS-ES.
DTS ES Dscrt6.1
z
The surround back channel added using the discrete method is played as an independent channel.
Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced.
This mode is suitable for playing discs recorded in DTS-ES.
DTS ES Mtrx6.1
z
The surround back channel added to the surround-left and surround-right channels by a matrix encoder at software
recording time is decoded by this unit's matrix decoder and played from each channel (surround left, surround right,
surround back).
DTS 96/24 This mode can be selected when playing sources recorded in DTS 96/24.
DTS-HD This mode can be selected when playing sources recorded in DTS-HD.
DTS Express This mode can be selected when playing sources recorded in DTS Express.
DTS:X This mode can be selected when playing back content encoded with DTS:X.
It decodes DTS:X content and its positioning data in real time and outputs audio from the appropriate speakers, creating
natural audio images regardless of the speaker layout. Use height speakers to realize a three-dimensional sound field.
DTS Neural:X This mode uses DTS Neural:X Upmixer to extend various sources to natural and realistic multi channels for playback.
Use height speakers such as front height speakers to realize a three-dimensional sound field.
z This can be selected when "Speaker Config." - "Surround Back" is not set to "None". (v p. 189)
PCM multi-channel sound mode
Sound mode type
Multi Ch In This mode can be selected when playing multi-channel PCM sources.
Front panel Display
Playback Settings
124
Rear panel
Tips
Description
Description
Remote Index
Appendix