Control Panel And Features - Maytag W10649241A – SP Use And Care Manual

CONTROL PANEL AND FEATURES

Not all features and cycles are available on all models.
1
NOTES:
The control panel features a sensitive surface that responds to a
n
light touch of your finger. To ensure your selections are registered,
touch the control panel with your finger tip, not your fingernail.
When selecting a setting or option, simply touch its name.
At cycle completion, your setting and option choices will be
n
remembered for your next use of that cycle. However, if power
is lost to the washer, the settings and options will go back to the
factory defaults.
POWER/CANCEL
1
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
NOTE: Turning the Wash Cycle knob will also turn the washer
on and off.
WASH CYCLE KNOB
2
Turn your Wash Cycle knob to select a cycle for your laundry
load. An LED will light up for the cycle selected.
NOTE: The Clean Washer with affresh
washer has run 30 wash cycles as a reminder to run the Clean
Washer with affresh cycle.
®
See "Cycle Guide" for detailed descriptions of cycles.
NOTE: For best results when using the Overnight Wash & Dry
cycle, use for loads weighing 2.5 pounds and less, such as a
soccer uniform or a running tank and shorts.
START
3
Touch and hold until the light above START comes on to start
a cycle, or touch once while a cycle is in process to pause it.
If you want to add a garment, you can touch START when the
"Add a Garment" LED is on.
LED DISPLAY AND SETTINGS
4
When you select a cycle, its default settings will light up and
the Estimated Cycle Time will be displayed. Factors such as
load size, wash temperature, and water pressure may affect the
time shown in the display. Tightly packing garments, unbalanced
loads, or excessive suds may cause the washer to lengthen the
cycle time, as well.
Touch the desired setting on the right side of the display to
adjust. See "Cycle Guide" for available settings on each cycle.
Not all settings are available with all cycles.
4
2
LED will flash when the
®
4
5
3
4
Temperature
The recommended wash temperature is preset for each cycle.
You may also select a wash temperature based on the type of
fabric and soils being washed. For best results, use the warmest
wash water safe for your fabric, following the garment label
instructions. All wash temperatures feature a cold rinse.
Soil Level
Soil Level (wash time) is preset for each wash cycle. When you
change the soil setting, the cycle time will increase or decrease in
the Estimated Cycle Time display.
For most loads, use the soil level that is preset with the cycle
you have chosen. For heavily soiled and sturdy fabrics, use the
Soil Level setting to select more wash time. For lightly soiled and
delicate fabrics, use the Soil Level setting to select less wash
time. Lower soil level settings will help reduce tangling and
wrinkling.
Spin Speed
This washer automatically selects the spin speed based
on the cycle selected. Some preset speeds can be changed.
Higher spin speeds mean shorter dry times, but may
n
increase wrinkling in your load.
Lower spin speeds reduce wrinkling, but will leave your load
n
more damp.
7
6
A
B
C
D
E
F