Sr+ Control For Pioneer Plasma; Displays - Pioneer VSX-D714 Operating Instructions Manual

Setting up the receiver
Coaxial digital 1:
• Default setting: DVD
• Use or to assign the coaxial
digital 1 input (DVD, TV, CD, CDR, VCR or
OFF).
Coaxial digital 2:
• Default setting: CD
• Use or to assign the coaxial
digital 2 input (DVD, TV, CD, CDR, VCR or
OFF).
Optical digital 1:
• Default setting: TV
• Use or to assign the optical digital
1 input (DVD, TV, CD, CDR, VCR or OFF).
Optical digital 2
(VSX-D814 only)
• Default setting: CDR
• Use or to assign the optical digital
2 input (DVD, TV, CD, CDR, VCR or OFF).
• You can't assign two inputs to the same
function. For example, assigning input 1
to the default setting of input 2
automatically switches input 2 to OFF.

SR+ control for Pioneer plasma

displays

Make the following settings if you have
connected a Pioneer plasma display to this
receiver using an SR+ cable. Note that the
number of function settings available will
depend on the plasma display you've
connected.
See also Using this receiver with a Pioneer
plasma display on page 27 and Using the SR+
mode with a Pioneer plasma display on
page 50.
Control mode setting
This must be switched to SR+ ON to access
the settings below (default is SR+ OFF).
• SR+ OFF – Switches SR+ off (the receiver
and plasma display work independently)
• SR+ ON – Switches SR+ on (the receiver
sends control signals to the plasma
display)
Volume control setting
• VOL C OFF – The receiver does not control
the volume of the plasma display
• VOL C ON – When the receiver is
switched to one of the inputs that use the
plasma display (DVD/LD, or another one
of functions listed below), the volume on
the plasma display is muted so only
sound from the receiver is heard.
Function setting for DVD/LD input
• DVD:1 – DVD:5 or TV – Matches the
DVD/LD function of the receiver with a
numbered video input on the plasma
display. For example, DVD:3 matches the
DVD/LD input with video input 3 on the
plasma display.
Function setting for TV/SAT input
• TV:1 – TV:5 or TV – Matches the TV/SAT
function of the receiver with a numbered
video input on the plasma display. For
example, TV:1 matches the TV/SAT input
with video input 1 on the plasma display.
07
47
En