Using Eon; Clearing All Stations From The Rds And Eon Searches - Pioneer VSX-D714 Operating Instructions Manual

Using the tuner

Using EON

STATION TUNING
TUNER EDIT CLASS BAND MPX
MULTI JOG
1 Press the BAND button to select the
FM band.
EON is only possible in the FM band.
2 Press EON MODE to select one of the
possible modes.
Press repeatedly to switch between:
• TA (Traffic Announcement) – Sets the
tuner to pick up traffic information when it
is broadcast.
• NEWS – Sets the tuner to pick up news
when it is broadcast.
• OFF – Switches off the EON feature.
When set to TA or NEWS, the EON indicator
in the display lights. When the receiver
switches automatically to an EON broadcast,
the indicator blinks.
• The EON function does not work when
listening to AM reception.
• You can't search for traffic
announcements and news at the same
time.
• You cannot operate the T.EDIT and
SEARCH buttons while the EON indicator
in the display is lit.
• If you want to change to a function other
than the tuner, press EON MODE to turn
EON off.
ADVANCED STEREO/ SIGNAL MIDNIGHT/
STANDARD SURROUND DIRECT SELECT LOUDNESS
LISTENING MODE
SETUP MIC DIGITAL IN
PTY EON
SEARCH MODE
Clearing all stations from the RDS
and EON searches
The receiver will automatically register an
identifying marker (called a PI code) for any
station you input into the memory classes
which can receive RDS or EON data. If you
want to remove the currently memorized
stations from RDS and EON searches, you
can do it by erasing the PI codes.
1 Press and hold EON MODE for about
two seconds.
ERASE PI is displayed.
2 Press ENTER.
ERASE PI flashes for two seconds to indicate
the PI codes have been erased.
08
57
En