Table of Contents
Advertisement
Postcode:
Sets your postcode to receive local information in the GUIDE Plus+
system (only available in some countries).
System
Information:
Displays the system information of the GUIDE Plus+ system (only
available in some countries).
DVB-T and Analogue channels are displayed on the same TV Guide
●
screen.
D
and
A
may be displayed to distinguish DVB-T and Analogue
channels. There will be no programme listings for Analogue channels.
Timer Programming
This function allows you to select programmes that you want to be reminded
to watch or record to the USB HDD.
1. Select the forthcoming programme with
access.
2. Select
USB HDD Rec.
To check / change / cancel a timer event
●
Recording > Timer Programming > Editing Timer Programming
LED will turn to orange in Standby mode if
●
To return to
TV Guide
●
BACK/RETURN
If you select the current programme, a confirmation screen asking
●
whether you want to watch or record the programme appears. Select
Timer Programming
record from the time you finish the timer event setting.
is displayed on the TV Guide screen if
●
from
TV
Guide.
Depending on the country you select, you can set
●
Recording
(see below).
= Note =
Not valid in Analogue
●
Timer Programming
●
received via the signal from the broadcaster or service provider.
Depending on the progress of recording, analogue channel may not be
●
selected.
When recording programmes to the USB HDD, be sure to format the USB
●
HDD and enable it to record in
Recording > USB HDD setup
/
Reminder
with
with
/
and press
only works reliably if correct time information is
USB Device
- 73 -
/
/
/
and press
/
and press
OK
to set.
Timer Programming
OK
to set
USB HDD Rec.
Timer Programming
Signal Supported
Setup.
OK
to
is set.
to
is set
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
