Panasonic TX-47AS800E Ehelp page 235

New Channel Message
(On / Off)
Selects whether to give a notification message when a new channel is found
or not.
Watching > Tuning and editing channels > New Channel Message
For DVB
●
Service Replacement
(On / Off)
Set to On to display a message to switch to the available service (only
available in some countries).
Watching > Tuning and editing channels > Other settings
For DVB-C
●
Signal Condition
Checks the signal condition.
Watching > Tuning and editing channels > Signal Condition
Not valid in Analogue
●
Antenna System
(One LNB / MiniDiSEqC
Sets the antenna system to use plural LNBs for receiving several satellites.
Watching > Tuning and editing channels > Auto Setup
For DVB-S
●
LNB Configuration
Selects the satellite for each LNB.
Watching > Tuning and editing channels > Auto Setup
For DVB-S
●
Attenuator
(On / Off)
Automatically reduces the DVB-C signal to avoid the interference.
Watching > Tuning and editing channels > Other settings
/ DiSEqC 1.0 / Single
- 235 -
Cable)